i think it is very hard to setup... the in emulator remap doesnt work...
i use nitho arcade joystik .. works great for all but uae4all have a strange issue...
i read about uae4all2-rpi-chips-0_5 but restarts, https://retropie.org.uk/forum/topic/1972/uae4all2-joystick-recommendation/8 for me doesn't works...
i don't want the moon..only play by joystick ... is there a roking workaround ?
thks

upgrade retropie-setup and remove the emulators you don't want from the gui.

https://github.com/retropie/retropie-setup/wiki/updating-retropie

Thanks @bizxaero good to know, will have a look.

@gomisensei it populates immediately after a load, but I guess only if the emulator
actually logs info to the console. what are you trying to load? please read this: https://retropie.org.uk/forum/topic/3/read-this-first

@Cole_48 Try without the ps4 controllers connected.

I just got my first Raspberry Pi and installed Retropie. I have loaded several Mame roms for mame-libretro and was feeling pretty cool. Then I accidentally switched the "TAB" to "None" to pull up the in game menu. Right as it was disappearing from the screen I screamed, "Noooooooooooooooooooooooooooo.......!", in a long drawn out slow motion type scream. I knew my only hope was a forum. As senkun said, thank you very much for coming back and updating the thread. I am new to command line stuff so knowing where it to look is a huge help, now I have to do some research and figure out the right commands. I have hope! Thanks again!

I think you'll need to start over as the code and optimizations for the ARM6 vs ARM7 are different.

The forum uses markdown - http://commonmark.org/help/ three backticks for code blocks or one for inline code.

You have retropie 3.4 I think, but the base OS is Raspbian Wheezy, so you will need a new image for Kodi 16 - upgrading from Wheezy is not recommended.

@BuZz

Ah, gotcha. Thought there was another alternative method. I mentioned doing that in the initial post.

Thanks.

If you delete the joystick cfg files, it would probably recreate them after you go into the RetroPie menu and configure inputs again.

After that, get to the terminal (press Esc on your keyboard), then type the following commands,

cd /opt/retropie/configs/all/retroarch-joypads/ ls

There should only be a couple of files in there, look for something with logitech or rumblepad in the name and:

sudo nano YourFileNameHere.cfg

Look for these lines:

input_enable_hotkey_btn input_exit_emulator_btn

If you don't have those lines, add them somewhere towards the bottom.

Mine is listed as:

input_enable_hotkey_btn = "6" input_exit_emulator_btn = "7"

This means, my enable hotkey button (tells the Pi you're going to issue a command that isn't related to the game itself) is the "Select" key (or better yet the "Back" key because I'm using a Logitech F710)

And the command button is the "Start" key. Now I can hold down "Back" and press "Start" to get back to the main menu.

This page should be a little more descriptive if you need a hand: RetroPie Wiki -> Logitech controllers

@Riverstorm Ready Player One is an excellent read - fingers crossed that the movie adaptation can do it justice.
Unfortunately I was less enthralled with the author's second novel, Armada.

@BuZz I will try that out as soon as I get home from work. Thank you very much for looking into that and for such a speedy fix. You are awesome!

EDIT: Works like a charm now! Good to know that it wasn't something I was doing wrong. Thanks again!

If you have disabled the 8bitdo hack it should work without the fix. The fix was for 8bitdo with old firmware and hack on

@BuZz Just updated the firmware to stable 2.68 on the SNES30 controllers, disabled the hack, removed then repaired. Both are now working. Thanks.

@jefftheguyperson just FYI - I formatted your earlier post for you.

Sweet, thank you very much!

@jrburke99 said in Add Second Controller and Alternate Controller Configs:

I am using an SNES to USB adapter which supports 2 SNES controllers. I have the one SNES controller configured and working fine. I want to plug in the #2 SNES controller and configure that for use as player 2 in all emulators. How can I easily do that?

Did you try to plug and then play? :-)

Additionally, I have a Playstation to USB adapter, and I have used that in the past on older versions of RetroPie. If I wanted to configure that again for use as an alternate controller for player #1, how would I go about setting that up?

The easiest way: https://github.com/meleu/RetroPie-joystick-selection

The I-wanna-learn-all-this-stuff way is to learn about how the system order the joysticks (giving indexes to them) and then check the retroarch.cfg files and look for the input_player1_joypad_index line and edit it to fit your needs.

I would want to be able to either have my SNES controller connected and use it, OR have the PSX controller plugged in and use that instead without having to go through any kind of configurations each time. I am fine with rebooting to change controllers.

I'm working to improve the RetroPie-joystick-selection to do it. With no need to reboot and/or change controllers. You just have to wait a little...

I have tried looking up info on using multiple controllers, but usually there is information overload, or I cannot find exactly what I want to do. So if anyone could walk me through the exact steps, I would appreciate it.

Let me know if you wanna follow the I-wanna-learn-all-this-stuff way, and can share some info with you. Or maybe the RetroPie-joystick-selection can make you happy... :-)