Oh ok. I thought it was working on both.

Finally got it!!!! Thanks guys. I'm just a clumsy bafoon.

So I have a shader question now that I have the file in the right place. I guess I'll start a new topic for it.

@BuZz That was it. Fixed it.

Thank you.

Gotcha. I was just testing something to see what built. Will go try Daphne then.

Ok, updated. It looks like it's working now, I'm a little concerned that it chipped off all the lines after the first if and put a line of @@@@@@ in there.

Binary has been updated and I can confirm that it is fixed.

Try pressing the buttons set up as "Select" and "X" on each of your controllers and your keyboard if you've set them up already in emulationstation. One of them should work, hopefully.

As for getting 6 button controllers work for the Megadrive, there is a setting in the retroarch menu, under core settings that lets you tell the emulator that a 6 button controller is inserted, and that is what worked for me. This may be dependant on which emulator core you use.

As dankcushions said, also take a look at the controller configuration page.

Just made sure my RPI was up to date with latest scummvm binary and the opengl option worked ok here. Perhaps something else in your config - you could remove /opt/retropie/configs/scummvm and re-install from binary and see if that helps.

@BuZz said:

Why ? The wheezy version is no longer supported and you would be better off with 3.6 - if you have a problem with that version, perhaps we can help.

i have a 3.6 TFT, and it haven´t almost no support

the little information I've found is to install in raspbian wheezzy and not is support
for jezzy.

http://appdictive.dk/blog/projects/2015/10/30/cheap_tft_display_on_raspberry_pi/

@gutossn said:

I have the Retropie 2.6 for RP1. If you want, i can upload to you the img file from sd card (8GB). Google Drive. See ya.

i thank you very much, I appreciate it but I prefer to wait to see if I get a newer version

@Drakaen391 yes, by removing the p3 controller configuration from the ps3 controller configuration menu (same place where you installed it)

@mad61190 Yes, like I tought. That is your monitor that isn't passing the right info to the Raspberry/Kodi. A fix for that can only be made in Kodi program itself.

Is there needed to config the Controller again to play with the ROMs? I can control everything in Menu but if the ROM is starting than the Controller is not anymore working.

@caver01 said:

You should be able to get very good spinner support working in AdvanceMAME. I have an Ultimarc U-TRAK trackball and two (2) Groovy Game Gear TurboTwist 2s working perfectly in AdvanceMAME, but it took some messing around with the advmame.rc file to get it setup properly.

Check here:
https://retropie.org.uk/forum/topic/106/trackball-working-in-mame4all-but-not-advmame/2

That's awesome! I will give it a shot and let you know how it worked.

@herb_fargus I will try and see what happens o/

D'oh. Fixed it. Sorry. Didn't realize the whole network went south.