@mdarr007 said in 64 bit Retropie for Dolphin?:

Anyway it seems Dolphin is not available to me on my new Pi4 for some reason

As @sleve_mcdichael mentioned, installation needs a 64bit OS and also a recent OS. Do note that the Pi4 is underpowered for running Dolphin (Gamecube or Wii games) and the games will not run fullspeed on the system.

OBS Studio (video capture tool) adds this strange, unwanted scanline effect right away, which is even more annoying. It might be related to the encoder settings, and I basically have no idea how to get rid of it. The game itself and the CRT shader looked perfect on screen. The curved lines were added after I captured it. This can be seen in the video from my channel.

Leaving aside the fact that 2GB is not enough to run the latst RetroPie image (or RaspiOS for that matter), this looks like an issue with the way the card is read/writen - are you using a mSD adapter or a SDcard port on your PC ?

@Moulinex I did the installation guide

At some point I was suspecting the SD card but it seems it was fine

But I did not have the "ASCII" Retropie color logo when you start the Pi in bash mode

{Too long and don't wanna read all that}

I have a save file that is zipped by default.

Never seen that before until now.

That error shouldn't have an impact on running a N64 game - can you please post the entire /dev/shm/runcomamnd.log file ?

Do you also get an error if you install the lr-mupen64plus-next N64 emulator and run the game with it ?

It seemed logical to buy a Pi 5 which was already 2 years after its release in 2023. Being a novice to Pi in general, it was quite a struggle but I basically succeeded in getting Jaguar Tempest 2000 to run on my Pi 3, only to find out the Pi 3 is WAY too slow for it. Retropie still isn't a simple install, but once again with a lot more effort Tempest is at least installed, and very smoothly is running through its demo screens so it appears that Pi 5 is fast enough to play it. But controls don't work - more struggle to come. The method of screen rotation is very annoyingly not compatible with previous methods requiring jumping out of Emulationstation to set the rotation for every reboot (wtf where the developers thinking??). Pi 5 also lacks a sound jack requiring consumption of a USB port and the sound isn't working correctly with the adapter. I would say a Pi 5 is a poor option for use with Retropie. I'm sorry I bought it.

It seems that Retropie does not currently handle dual monitors. I am going to try a few different options. Maybe loading the Pi right into Mame, or maybe start an OS with retroarch and load a core.

More to come….

@mitu I don't remember I haven't booted Linux on arcade in a while. Sorry.

@roslof Do you have a folder with "lr-mame" 0.278 for rpi5 64bit that you can share? Thanks

@BlackLord
note : my understanding is that this modified genplus-gx core is breaking some stuff, so it is not recommended to replace the original genplus-gx core by it (which is probably what you did)

@mitu thank you problem solved:
Deleted 1st partition (unused 16mb)
And now /dev/sda1 is correctly mounted ...on my hdd2...465gb
Retropie boots quickly and without warnings.
Thanks

For the record the 'X' button on my XBox360 Controller is detected as 003 via hypjsch

So I doubled checked that against the Joystick API config:

KEY_BUTTON2 = SDLK_LALT 0 3

And again 'X' was FEET and played fine.

@BurndtJamb said in help installing screen driver on pi zero 2 w with retropie:

. I can't get ssh working since i don't know the ip address due to not having a screen. is there either a way I can install the necessary stuff without ssh?

If you don't have a direct interface (i.e. monitor + keyboard) to the RPI, then you need SSH. If you don't know the IP, you can try connecting using the hostname instead - for the RetroPie image the hostname is retropie (you can also try with retropie.local)

@duglor

The only thing I can think is to enter the runcommandmenu when you start a game and try to select a different resolution.
Really a long time ago since I used this stuff and no time to look into it.
Might be that someone else has an idea.

Please include all the info requested in https://retropie.org.uk/forum/topic/3/read-this-first to be able to assist you.