@Trailjacker I fixed it I just switched emulators by entering the config setting of the n64 emulator

@challenger2010 Apologies for bringing this back from the dead, I wondered if you'd managed to resolve this calibration of analog joysticks in advmame?

I am trying to configure some pots for a Warlords mame cab, and I have a nasty deadspot at 0,0 that I want to remove!

http://www.advancemame.it/doc-advj

Thx in advance (mame)

R

@kchaos The Latte Panda has an intel CPU or you could get an Intel NUC. These would both use the x86 architecture.
SOC, means system on a chip.

@mitu I updated the compiler and it worked great! thank you!

@ben0710

Not a problem. Glad it's working.

@mitu

I don't have a keyboard! I borrowed one from a friend so that I could enable ssh. I always log in from my laptop. Probably I should buy a cheap one for the raspberry, I know.

thanks yup it worked when the image dispaears, will look into the time change

@mitu Thanks. I'm a little new to the forums and thought I was replying to a thread where someone had a very similar issue. I went ahead and made a new post.

thanks TAB does some of the main things I needed

Thanks @caver01 and @Spiky, works now.

also, to ensure that none of my changes have affected this, i just tried a default, no rom, freshly downloaded install. still the exact same results.

@fingal perfect! That’s what I was hoping it would do, but hard to explain exactly. So:witnessed you have to go back to games that you already tried mapp8ng 8n this manner and update those too, because they might have their individual saved key maps.

Glad we solved it.

@herb_fargus correct there is nothing plugged into the usb port at all. I have removed everything to make sure it isn't causing the problem. it is a 3.1a usb charger with a cable that is about 3ft long

I use a madcatz TES+ (Shadaloo version)

it works on the pi3

@markyh444 yes it is

Plug in a keyboard and press f4