Follow-up: I did some more digging and read somewhere on the xpadneo github that they have a hypseus module in the code. I never thought to try hypseus, I guess I had it stuck in my mind that Daphne was "the" laserdisc emulator. I installed hypseus and it works with the Xbone controller. I only had to configure the select and start buttons. The exit as configured in ES (start + select) works as well. In Daphne the start+select to exit didn't work and I had to configure another button.

Big props to @DirtBagXon, I found your github and followed the instructions: https://github.com/DirtBagXon/hypseus-singe. Thank you thank you thank you.

I hope this helps anyone else stumbling into this issue. I like my xbone controllers and am trying to get away from Xbox 360 controllers + dongle.

TLDR: Xbox One controllers will not work with Daphne. Use hypseus.

@mitu Thanks a lot, that fixed it :)

Try updating RetroPie-Setup and installing attractmode again.

Just an update on this, even after installing the new Flycast, I still get what I can describe as "screen tearing" or glitching when motion is happening. This isn't consistent, so maybe it's related to framerate drops?

I am using a Pi4 8GB without any mods, just stock settings for performance.

FYI proper save state support for Bubble Bobble and the other game in that driver Tokio wasn't added until a much later version of MAME
0.135u2: Fabio Priuli added save state support to Bubble Bobble driver.

@niyoki said in lr-caprice32 select + start combo triggers 2 actions = Virtual Keyboard & Exit command?:

Hello,
On the Amstrad CPC Lr- caprice32 emulator: if I press gamepad select + start buttons combo, those are triggering two actions at the same time.
Emulator exiting back to the game selection screen on the emulationstation and virtual keyboard for before the emulator exiting.
Because of this behavior I can't use the virtual keyboard.

All the best
Niyazi

I changed above post, maybe know better to read.
All the best
Niyazi

@mitu Thank you for the reply. Here are the info.

Pi Model or other hardware: Pi4B
Power Supply used: 5V3A
RetroPie Version Used: 4.7.1
Built From: Pre made SD Image on RetroPie website
USB Devices connected: Gamepad; 32Gb USB drive
Controller used: Havit G89W
Error messages received: n/a
Verbose log (if relevant): /dev/shm/runcommand.log

Parameters: Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-pcsx-rearmed/pcsx_rearmed_libretro.so --config /opt/retropie/configs/psx/retroarch.cfg "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).cue" --verbose --appendconfig /dev/shm/retroarch.cfg [INFO] RetroArch 1.8.8 (Git 9552f87) [INFO] Redirecting save file to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).srm". [INFO] Redirecting save state to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).state". [INFO] === Build ======================================= [INFO] Capabilities: NEON VFPv3 VFPv4 [INFO] Built: Nov 2 2020 [INFO] Version: 1.8.8 [INFO] Git: 9552f87 [INFO] ================================================= [INFO] Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-pcsx-rearmed/pcsx_rearmed_libretro.so" [INFO] [Overrides] no core-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/PCSX-ReARMed.cfg. [INFO] [Overrides] no content-dir-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/Marvel vs. Capcom - Clash of Super Heroes (USA).cfg. [INFO] [Overrides] no game-specific overrides found at /home/pi/.config/retroarch/config/PCSX-ReARMed/Marvel vs. Capcom - Clash of Super Heroes (USA).cfg. [INFO] [Environ]: GET_LOG_INTERFACE. [INFO] [Environ]: GET_LANGUAGE: "0". [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL. [INFO] [Remaps]: remap directory: /opt/retropie/configs/psx/ [INFO] Redirecting save file to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).srm". [INFO] Redirecting save state to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).state". [libretro INFO] Memcard 2: disabled [libretro INFO] Starting PCSX-ReARMed [libretro INFO] Running PCSX Version 1.9 (Oct 29 2020). [libretro INFO] Init new dynarec [libretro INFO] testing if we can run recompiled code.. [libretro INFO] test passed. [libretro INFO] Mapped (RAM/scrp/ROM/LUTs/TC): [libretro INFO] 80000000/1f800000/1fc00000/08000000/aebe9000 [INFO] [Environ]: SYSTEM_DIRECTORY: "/home/pi/RetroPie/BIOS". [libretro INFO] found BIOS file: PSXONPSP660.bin [INFO] [Environ]: GET_CAN_DUPE: true [INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE. [INFO] [Environ]: GET_RUMBLE_INTERFACE. [INFO] [Environ]: PERFORMANCE_LEVEL: 6. [INFO] Content loading skipped. Implementation will load it on its own. [INFO] [Environ]: SET_INPUT_DESCRIPTORS: [INFO] [Environ]: SET_PIXEL_FORMAT: RGB565. [libretro INFO] RGB565 supported, using it [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_DISPLAY. [libretro INFO] plugin: plugins/builtin_gpu [libretro INFO] plugin: plugins/builtin_spu [libretro INFO] plugin: plugins/builtin_pad [libretro INFO] plugin: plugins/builtin_pad [libretro INFO] Plugins loaded. [libretro INFO] Loaded CD Image: /home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).cue[+cue]. [libretro INFO] Track 01 (DATA) - Start 00:02:00, Length 40:27:38 [libretro INFO] CD-ROM Label: MARVEL_VS_CAPCOM [libretro INFO] CD-ROM ID: SLUS01059 [libretro INFO] CD-ROM EXE Name: SLUS_010.59;1 [INFO] Skipping SRAM load.. [INFO] Version of libretro API: 1 [INFO] Compiled against API: 1 [INFO] [Cheats]: Load game-specific cheatfile: /home/pi/.config/retroarch/cheats/PCSX-ReARMed/Marvel vs. Capcom - Clash of Super Heroes (USA).cht [INFO] [Audio]: Set audio input rate to: 44100.00 Hz. [INFO] [Video]: Video @ 800x480 [INFO] [Video]: Starting threaded video driver ... [INFO] [DRM]: Found 2 connectors. [INFO] [DRM]: Connector 0 connected: yes [INFO] [DRM]: Connector 0 has 1 modes. [INFO] [DRM]: Connector 0 assigned to monitor index: #1. [INFO] [DRM]: Connector 1 connected: yes [INFO] [DRM]: Connector 1 has 1 modes. [INFO] [DRM]: Connector 1 assigned to monitor index: #2. [INFO] [DRM]: Mode 0: (FIXED_MODE) 800 x 480, 60 Hz [INFO] [GL]: Found GL context: kms [INFO] [GL]: Detecting screen resolution 800x480. [INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay [INFO] [EGL]: EGL version: 1.4 [INFO] [EGL]: Current context: 0xac139508. [INFO] [KMS]: New FB: 800x480 (stride: 3200). [INFO] [GL]: Vendor: Broadcom, Renderer: V3D 4.2. [INFO] [GL]: Version: OpenGL ES 3.1 Mesa 19.3.2. [INFO] [GL]: Using resolution 800x480 [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shaders]: preset directory: /home/pi/.config/retroarch/config [INFO] [Shaders]: preset directory: /opt/retropie/configs/psx/ [INFO] [Shaders]: preset directory: /home/pi/.config/retroarch/shaders/presets [INFO] [Shader driver]: Using GLSL shader backend. [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [WARN] [udev]: Couldn't open any keyboard, mouse or touchpad. Are permissions set correctly for /dev/input/event*? [INFO] [udev]: Plugged pad: Microntek USB Joystick (121:6) on port #0. [INFO] [udev]: Pad #0 (/dev/input/event1) supports 0 force feedback effects. [INFO] [Joypad]: Found joypad driver: "udev". [INFO] [Font]: Using font rendering backend: stb-unicode. [INFO] [Video]: Found display server: null [INFO] Found shader "/home/pi/.config/retroarch/shaders/2xsal-level2-crt.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/2xsal.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/2xScaleHQ.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_lanczos4.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_phosphor.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/barrel-distortion_snes.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/Brighter-with_Contrast.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/bsnes_gamma_ramp.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-curvature-vertical.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-curvature.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi-vertical.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/crt-pi.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy-screen-grid.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/gameboy2.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/gba-color.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x&lcd3x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x2.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x_lcd3x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2x_phosphor.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2xwaterpaint.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq2xwaterpaintscanline.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq4x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/hq4x_lcd3x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/nds-color.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/nds.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/nedi.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/palm-color.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/phosphor.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/psp-color.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/retroarch.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-2x-prescale.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-scanlines.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/sharp-bilinear-simple.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes2.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpaint.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpainthicontrast.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_hq2xwaterpaintscanline.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_lcd3x.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_phosphor.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_scanline.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/snes_waterpaint.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/stock.glsl" [INFO] Found shader "/home/pi/.config/retroarch/shaders/super-2xsai.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/super-eagle.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/vba-color.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/xbr-lv1-noblend.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_curve.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_curve_vertical.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_standard.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_crt_standard_vertical.glslp" [INFO] Found shader "/home/pi/.config/retroarch/shaders/zfast_lcd_standard.glslp" [INFO] [ALSA]: Using signed 16-bit format. [INFO] [ALSA]: Period size: 768 frames [INFO] [ALSA]: Buffer size: 3072 frames [INFO] [ALSA]: Can pause: no. [INFO] [Menu]: Found menu display driver: "gl". [INFO] [Font]: Using font rendering backend: stb-unicode. [INFO] [Font]: Using font rendering backend: stb-unicode. [INFO] [Font]: Using font rendering backend: stb-unicode. [INFO] [Menu]: Found menu display driver: "gl". [INFO] [LED]: LED driver = 'null' 0x4b477c [INFO] [MIDI]: Initializing ... [INFO] [MIDI]: Input disabled. [INFO] [MIDI]: Output disabled. [INFO] [MIDI]: Initialized "alsa" driver. [INFO] Loading history file: [/opt/retropie/configs/psx/content_history.lpl]. [INFO] Loading history file: [/opt/retropie/configs/psx/content_music_history.lpl]. [INFO] Loading history file: [/opt/retropie/configs/psx/content_video_history.lpl]. [INFO] Loading history file: [/opt/retropie/configs/psx/content_image_history.lpl]. [INFO] Loading favorites file: [/opt/retropie/configs/psx/content_favorites.lpl]. [INFO] SET_GEOMETRY: 640x478, aspect: 1.333. [INFO] [KMS]: New FB: 800x480 (stride: 3200). [INFO] [KMS]: New FB: 800x480 (stride: 3200). [INFO] SET_GEOMETRY: 256x240, aspect: 1.333. [INFO] SET_GEOMETRY: 320x240, aspect: 1.333. [INFO] SET_GEOMETRY: 368x240, aspect: 1.333. [INFO] [Cheats]: Save game-specific cheatfile: /home/pi/.config/retroarch/cheats/PCSX-ReARMed/Marvel vs. Capcom - Clash of Super Heroes (USA).cht [INFO] Saving RAM type #0 to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).srm". [INFO] Saved successfully to "/home/pi/RetroPie/roms/psx/Marvel vs. Capcom - Clash of Super Heroes (USA)/Marvel vs. Capcom - Clash of Super Heroes (USA).srm". [INFO] Content ran for a total of: 00 hours, 00 minutes, 46 seconds. [INFO] Unloading game.. [INFO] Unloading core.. [INFO] Unloading core symbols.. [INFO] [Core Options]: Saved core options file to "/opt/retropie/configs/all/retroarch-core-options.cfg" [INFO] Threaded video stats: Frames pushed: 3317, Frames dropped: 1. selected sound output driver: libretro ari64_reset

Guide used: n/a
File: n/a
Emulator: lr-pcsx-rearmed
Attachment of config files: /boot/config.txt

# For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan #disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) hdmi_group=2 #hdmi_mode=82 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 lcd_rotate=2 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on [pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] #dtoverlay=vc4-fkms-v3d overscan_scale=1

How to replicate the problem: screen of pcx game is cropped and moved to bottom right. SNES games and the EmulationStation UI are ok.

@ohmycommodore Went with mode D instead of X and yes that does seem to eliminate the delay.

@mitu It worked! Thank you for helping me.

@m3chstaa

Hello

i try:

ppsspp = "/opt/retropie/emulators/ppsspp/PPSSPPSDL --fullscreen --escape-exit %ROM%"

and

ppsspp = "/opt/retropie/emulators/ppsspp/PPSSPPSDL --escape-exit --fullscreen %ROM%"

and also i try

ppsspp = "/opt/retropie/emulators/ppsspp/PPSSPPSDL --escape-exit %ROM%"

But noting seems to work.
Any other hint that i can do the ESC key to exit?

Edit:
found the soultion it is needed to add

Pause = 1-111

in

/opt/retropie/configs/psp/PSP/SYSTEM/controls.ini

Thanks anyway

@AEtherScythe after you change the configuration to swap buttons, I believe you also have to remap the controller in emulation station for it to work properly. Hope that helps.

@saki I don't know what fruitbox is. Default themes are in /etc/emulationstation/themes which is not backed up over the network share but you can copy (or move) them into the "custom" location at /opt/retropie/configs/all/emulationstation/themes and they will be included.

@mitu Thanks for looking at it. I've opened an issue at Retroarch git, just in case

@mitu

Sweet!!! that did the trick. It disabled my gamepads while playing arcade. I can now exit the arcade using the 'esc' key.
Thank you!!!!

@mitu
Yep. Standard gnome ubuntu. Tried it with both wayland and X sessions.
Same problem though. Stutter won't go away.
Note that the stutter also affects sound. It's not a simple TV mode that's causing tearing. My TV is using Game mode.

@sleve_mcdichael Thanks a lot, for some weird reason I couldnt find it before lol

@mumihp did you managed to solve your problem?

@Thorr69 said in connect to tv and monitor:

Totally not what he asked about and why are you answering this really old thread?

Spam, really.