yeah, its the preconfigured mame2003. It does seem that the read-only hack will work, so I guess I'll go with that.

@hoofa8 I'm using my own made dual arcade control panel ( based on ipac 2) and an Xbox wired gamepad at the same time: no issues.

@mitu Thank you ;-)

@djpj3000

Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

https://retropie.org.uk/docs/Running-ROMs-from-a-USB-drive/

Check the Runcommand log at /dev/shm/runcommand.log and see if you have an error reported there, the file should appear after trying to run a game and you're thrown back to the ES menu.

Make sure you didn't inadvertently disable the "Run Command" option.

@mitu
Omg thanks bro it worked!!! I removed pwad and now sunlust booted in prboom plus!!! Finally but is there a way So u dont have to do it through cmd Each time?
Cause thats kind of anoyying but ill do if i have too heh after 2 days of messing with files :/ sigh happy now

Edit:
But is there a way i dont have to use the command line everytime? And do you know how i can stretch the image? Thats pretty Much all i need to know and ill be set you seem like you know alot so thats cool and thanks for helped so far :)

Thanks for the updates. I am glad it is recognized as an issue. Maybe the speedhacks will help the gameplay once all of this is resolved. I am always up for some improvement!

@mitu said in 2 players on a single keyboard (encoder usb):

@beccio https://retropie.org.uk/forum/topic/2/forum-rules - the forum does not offer support for 3rd party images and links to copyrighted material (ROMs or other sources of games) are not allowed.
Please remove the link to the ROM image and try to use the RetroPie image from this site if you need help in configuring the controller, 3rd party images have different customizations/configurations which can deviate quite a lot from the image provided by the RetroPie project.

ok, thanks. I've removed the link to the "illegal" image.

I will try to install a clean version of a 4.3 retropie and i will try to have help for the jvs-pac configuration in this way.

Can be ok?

Thanks

@cpt-bananas Re-install Emulationstation from the RP setup script and see if that fixes it.

@brigane i found prboom plus only thing is i have no clue how to load wads with prboom plus can anyone plz help me with that?

Also difference is prboom is An old engine like 10 years old ..prboom plus is new still being updates and also runs the smoother with uncapped framerate as well

Nevermind.... it doesn't work.

I tried redoing my configs because the switch pro controller would get recognized 1/4 of the time. Ended up with the Pi detecting the pro controller but not the switch pro controller.... I don't get with this is so difficult with the switch...

@mitu Lol sorry, didn't saw that.

@buzz

Thnks alot for the great help , the upgrade went ok without any problem

@megafacehead Sound like an undersized card to me. Have you check what Linux reports as free space on the disk ? Log in via SSH or just drop to a command line by pressing F4 on the ES screen and run df -h to see how much space is available on the card.

As a note, it looks like lsusb shows both controllers by retroarch is only listing one Under Device Index.

I'm wondering if there's a way to force both to show?

@jonnykesh It may well work on Debian 9 - we just dont yet support Stretch on the RPI . We recommend Ubuntu though for the PC as it's what we test on.

Their issue is likely driver related but cannot advise with so little information.

@saint_jimmy Happy to help! No, just follow the instructions and from then on you can just plug your usb flash drive in your pc and transfer your games to the usb. Save files will be stored there as well.

@mitu Legend! Seems so simple I feel dumb for not even considering that

i look into that, and tweek mine a bit. yet again thanks for your help