This is a RetroPie dedicated forum - are you using RetroPie ?

If so, please add some info about your setup as asked in https://retropie.org.uk/forum/topic/3/read-this-first.

Does it work if you remove all bootable SDcards/USB disks - i.e. do you get the PI4 diagnostic screen ?
Please add soem info abour your setup, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.

@duglor 2.9.0 isn't released yet.

Thank you for your answer. Actually I played a bit with retroarch.cfg, with someof the controllers pluged in in differents usb port and it seems to work now ! Not exactly sure what really made it work though :)

@Lolonois Those are all excellent suggestions. Lots to try. Thank you. I like the idea of sshfs. I don’t use NFS for anything else so that’s one less service to run server side. That’s interesting about eduke. I just assumed install from source would be the latest. Guess not. Do you know does prboom also not install the latest from source?

Alas shortly before your response I said enough and tossed Recalbox on my Pi. It’s playing Doom just fine from NFS which RetroPie was not. Another thing that points to it being a RetroPie problem. Next time I’m bored, which is pretty much always, I’ll toss RetroPie back on the Pi and try your suggestions. I had updated my RetroPie via retropie_setup. Did you do that? I always wondered if I reflashed and didn’t update if the ports would work fine. I’ll be sure to test that first thing before updating when i do flash.

@mitu said in Install Sixaxis on an old Raspi 3b+:

@pscotto1234 You can either look in $HOME/RetroPie-Setup/logs and unpack the latest log file or just post the error you're seeing on screen.

I tried to launch Retropie Setup script and I am not able to launch it anymore. This is the log I had:

pi@retropie:~/RetroPie-Setup $ sudo ./retropie_setup.sh Did not find needed dependencies: subversion python3-pyudev dirmngr. Trying to install them now. E: Command line option --allow-releaseinfo-change is not understood in combination with the other options Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libbluray1 libgles1-mesa libiso9660-8 libmodplug1 libvcdinfo0 libvlccore8 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libapr1 libaprutil1 libserf-1-1 libsvn1 python3-six Suggested packages: dbus-user-session pinentry-gnome3 tor python-six-doc db5.3-util subversion-tools The following NEW packages will be installed: dirmngr libapr1 libaprutil1 libserf-1-1 libsvn1 python3-pyudev python3-six subversion 0 upgraded, 8 newly installed, 0 to remove and 11 not upgraded. Need to get 2,850 kB/2,903 kB of archives. After this operation, 10.2 MB of additional disk space will be used. Err:1 http://raspbian.raspberrypi.org/raspbian stretch/main armhf dirmngr armhf 2.1.18-8~deb9u4 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Err:2 http://raspbian.raspberrypi.org/raspbian stretch/main armhf libapr1 armhf 1.5.2-5 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Err:3 http://raspbian.raspberrypi.org/raspbian stretch/main armhf libaprutil1 armhf 1.5.4-3 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Err:4 http://raspbian.raspberrypi.org/raspbian stretch/main armhf libserf-1-1 armhf 1.3.9-3+deb9u1 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Err:5 http://raspbian.raspberrypi.org/raspbian stretch/main armhf libsvn1 armhf 1.9.5-1+deb9u5 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Err:6 http://raspbian.raspberrypi.org/raspbian stretch/main armhf subversion armhf 1.9.5-1+deb9u5 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/g/gnupg2/dirmngr_2.1.18-8~deb9u4_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/a/apr/libapr1_1.5.2-5_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/a/apr-util/libaprutil1_1.5.4-3_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/s/serf/libserf-1-1_1.3.9-3+deb9u1_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/s/subversion/libsvn1_1.9.5-1+deb9u5_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Failed to fetch http://raspbian.raspberrypi.org/raspbian/pool/main/s/subversion/subversion_1.9.5-1+deb9u5_armhf.deb 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Unable to install packages required by /home/pi/RetroPie-Setup/retropie_packages.sh - Could not install package(s): subversion python3-pyudev dirmngr.

Resolved changing repository link with:

deb http://legacy.raspbian.org/raspbian/ stretch main contrib non-free rpi

I hope this could help someone else with the same issue!

@CobraDesign47 said in Trouble Running Games:

Any further advice is appreciated!

Again - please provide the info asked in https://retropie.org.uk/forum/topic/3/read-this-first, including the emulator and ROM/system where you have trouble.

You can also provide a log file after you've activated verbose logging; copy the contents of the log file (/dev/shm/runcommand.log) and post it on pastebin.com, providing here the link.

Try to reset the controllers.

While you are in emulationstation press the F4 to jump to the terminal window, and type :

sudo ~/RetroPie-Setup/retropie_setup.sh

Then choose :

Manage packages => Manage core packages => emulaionstation => Configurations / Options => clear/Reset emulationstation input configuration

After that, restart the system and it will ask you to configure again your controllers.

@sleve_mcdichael having had a cursory look I can confirm and I lean towards "won't fix".

Rationale: As long as there are SDL events they get pumped into the Window.cpp/GuiComponent::input() call chain an consumed from there. Every downwards component "sees" one event at a time. Processing of the event is stopped either at the last GuiComponent in the chain or if a input() call returns true.

This also happens with Use LR/LB for full page navigation set to false. It just does not occur as easily as the cursor most of the time is always placed middle.

One option to remediate may be to measure the time between the events and if they are too close (i.e. less time than between update()/render() calls) drop the second, and ofc only if the events are LR/LB.

@Clarky_gtt said in Can't find IP address on preloaded xu4:

I have a preloaded xu4 that I installed in my modded arcade 1up cabinet. There are a couple of games that don't work in mame that I want to find working roms for ...

We don't support 3rd party images, start with a clean Ubuntu image and install RetroPie over it, as explained in the docs.

How can I easily add roms or find my ip so I can easily add via my laptop and network... Or that's how I understand it?

That's covered in the docs also. Unless your laptop is running Linux, a sdcard with RetroPie cannot be read from your laptop, so you should use the network to transfer ROMs (SSH or File shares, as explained in the page mentioned previously).

I think you're confused. This is the RetroPie project community, not Recalbox. Check in their discord: https://discord.com/invite/RR2jc5n

@PiBoyyy said in Can you add UI sounds to your RetroPie theme?:

Is it possible to add them to my theme?

Right now only 'scroll' sound is available - see here in addition to the Creating Your Own EmulationStation Theme page from our docs.

@Retrodade You're welcome! :D

@alexp just to clarify, LEDSpicer supports both Single color and RGB
if you need minimal functionality then you are set.

I found a solution from older post. I changed controller order from RA menu and use an override, it's working.

@gilmo714 No links to copyrighted material please - see the forum rules.

@AwesomeKingClem don't remove your posts, makes the replies you got seem out of place and breaks the topics. That's not how a forum works.

@mitu Ha! I was just watching Floob's video linked above and I did exactly what you posted! Thanks again to the team! Your help is always very much appreciated!

@abj wird that works :) thnx

@sleve_mcdichael, yep removing the hash worked. Basic knowledge, easy fix, thanks a lot!