@Oxopi said in Controller with retropie:

The left analog up, down, left and right says already taken if i hold against the setting it then says not defined
The same goes for the right analog

That indicates the analog sticks might emit the same input data as the D-Pad. I notice there's an Analog button on the controller - what is the function of it ?

You can exit EmulationStation (via the menu or just pressing F4) and test the gamepad's buttons with the jstest command by running

jstest /dev/input/js0

and pushing the buttons and operating the analog sticks - see if the analog sticks are overlapping with other buttons/D-Pad. Exit the test by pressing Ctrl+C.

Also what should the hotkey be set to

You can leave it as default - don't set one and you'll be asked to use Select - or try to use the raspberry button at the top.

Correct, @mitu , I created a separate system that lists the conf files:

<system> <name>p2000t</name> <fullname>Philips P2000</fullname> <path>/home/pi/RetroPie/roms/p2000t</path> <extension>.conf .CONF</extension> <command>/opt/retropie/supplementary/runcommand/runcommand.sh 0 _SYS_ p2000t %ROM%</command> <platform>p2000t</platform> <theme>p2000t</theme> </system>

Runcommand looked good:

Parameters: Executing: /opt/retropie/emulators/dosbox-sdl2/bin/dosbox -conf "/home/pi/RetroPie/roms/p2000t/Monkey.conf" fluidsynth: warning: Requested a period size of 64, got 480 instead fluidsynth: warning: Failed to set thread to high priority fluidsynth: warning: Failed to pin the sample data to RAM; swapping is possible. DOSBox version SVN Copyright 2002-2019 DOSBox Team, published under GNU GPL. --- CONFIG: Loading primary settings from config file /home/pi/RetroPie/roms/p2000t/Monkey.conf SDL: Current window pixel format: SDL_PIXELFORMAT_ARGB8888 MIDI:fluidsynth: loaded soundfont: /usr/share/sounds/sf2/FluidR3_GM.sf2 MIDI: Opened device:fluidsynth One joystick reported, initializing with 4axis Using joystick Xbox 360 Wireless Receiver with 6 axes, 15 buttons and 1 hat(s) Using driver "opengl" for renderer

I am happy to investigate more if it helps the community. If we collectively believe this is a problem with a 20-year old emulator, I am also content to call this one good enough and run without a joystick. :)

@Oxopi said in so all generic USB n64 controllers work nowadays?:

https://thepihut.com/products/raspberry-pi-compatible-wireless-gamepad-controller?variant=38135423121

That's not a N64 controller, that's not what @peggytam009 asked.

@dankcushions Thanks for the response! Unfortunate but understandable.

Hi toghether,

@mitu , moving the File out of way had no effect.

@BuZz here is the Config.txt

# For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan #disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output #hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on [pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] #dtoverlay=vc4-fkms-v3d overscan_scale=1

Greets Trekinfo

It's a known problem - see https://retropie.org.uk/forum/topic/26504/.

The safest option would be be to install the latest Raspberry Pi OS Lite - which should have the USB boot supporting firmware on the/boot partition - on the USB disk, then perform a Manual install of RetroPie. The EEPROM bootloader is already updated, so USB boot should work.

You really got me confused with that config... so just a few thoughts:

Here is Ultimarcs Default Setting [under Tab: Installation] for the I-Pac#, and the ones in your config seem to be mixed/messed up with the (I-PAC) shifted defaults (player 1 defaults for the joystick/d-pad are cursor u/d/l/r)...
And my curiosity about your .cfg reminds me: At first I should have reminded myself (and you) that third party images are not supported on this forum. To debug/help you on this, if your builder wasn't a friend who had set it up with an official build and got paid for the hardware alone and added your roms on your behalve, I think that another sd card with a fresh retropie install (keeping formerly as a backup in case you need stuff from there) would be a good start. And by doing so, regardless what your son may do in the future, you will be prepared to set it up again!

Right finally got this working :)

To confirm, 3rd party images at the moe dont seem to be supported, but just wanted to highlight the official ''image'' download of 4.6 (found under pi4, https://retropie.org.uk/download/) also does not work and you will get a boot error occur

You can however get RP 4.6 to work! From official Raspberry Pi page, download the imager app: https://www.raspberrypi.org/downloads/

Using the app, there is an option to choose the op system you want to install, so retropie for us and then let it do its thing. It will format disk/write image in one go. Once you put the SDcard in Pi, it will boot, no errors whatsover straight into Retropie!

Note: If you use windows 10, there is chance the imager will fail to write, its a windows setting thats the issue and this is the fix: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=267364&sid=f6d32a82c84ebcfacdc2b3f1536cc4c1&start=25#p1664662

With Pi up and running! just needed to load roms which are on my external ssd. (indeed, the following is correct proc: https://retropie.org.uk/docs/Running-ROMs-from-a-USB-drive/). The SSD was again working painfully slow and needed the fix mentioned (https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=245931) to sort that out.

Finally got RP working! in for a long scrape now for artwork before i can get onto some tweaking :)

Thanks everyone.

@mitu That did it! The file was in autoconfig called Arduino LLC Arduino Leonardo.cfg

Now when I push Select and Trigger nothing happens. Phew! :)

@YFZdude

Very useful information and I very well understand

Thank you for bringing all that to my attention

Lucky enough I haven't play any games

I was mainly planning on , tweaking it , downloading and loading stuff into it meanwhile before i get the proper power adapter

Thanks again for the info

@alt126 said in Arcade & Mame resolution:

What I have to modify to have a better resolution?

Resolution is fixed, you can't change it. The only thing you can do is apply filters, which is exactly what your first screenshot is about : there is a blurry effect on it. It's probably retroarch's bilinear filtering, you can find it in retroarch menu : Setting > Video > Bilinear Filtering. Well, i think that blurry effect is horrible tbh, it feels like i need glasses, but i guess everyone has their own tastes.

@mitu thank you.

At least it wasn’t a silly checkbox that I Missed.

Another reason could be that the rom name doesn't match the video name.

@Ashpool Thank you SO MUCH. I've spent way too long on this and wish I'd worked that out. Big help!

@Rascas
got u thanks ,
anything else like that ? (desktop? )

Please add more info about your setup, as requested in https://retropie.org.uk/forum/topic/3/read-this-first.

@challenger2010 said in No sound at all in Mortal Kombat 2/3/Ultimate:

I remember long ago that with Midway games in Mame, you had to go into the service menu of the game and turn the volume up.

This is right as the default volume is quit low on these machines.
But in the end you should hear something (very quit...but no silence at all), and the author mentoined that he allready used the volume control in the service menu ("F2").

Just to mention it: AdvanceMame has this great feature "auto level volume" which prevents me from running to the volume control on my setup as i dont have a remote control for my 2.1 logitech-soundsystem :)

@MeltedPineapple I would appreciate if you wouldn't tag me directly, I find it rude. I'm trying to contribute as much as my free times allows in the forum, but that doesn't mean I need to respond to every topic and every user.

Please provide the info requested in https://retropie.org.uk/forum/topic/3/read-this-first when opening a support topic.
If you have trouble with your controller, try re-setting the gamepad configuration and re-map it again in EmulationStation.