@pjft said in Snaps/Video Issue with EmulationStation (V2.10.0RP-DEV):

Should be fixed now - thanks.

Confirmed, this is fixed. Always grateful @pjft
Thank you

@mitu thank you, that was the problem yes

@iandaemon @mitu
Booting into terminal fixed the problem and the games worked.
Thank you for the help 🙏

@mitu thanks for replying .I was trying to get the x68k emulator swap-disks to work rather than the retroarch's . its odd that there are not any info about it on the internet! it got to be a common issue. anyways I gave up :) its seems retroarch is a much easier option now.

thanks again.your guides on this website helped me alot with the whole retropie/launchbox thing . I appreciate it.

@azurden how did this workout for you?

@Boozina said in Cant install Pi4 images:

Used Images from Arcade Punks

We don't support 3rd party images. Use the Pi4 image from retropie.org.uk/download and it will work.

@mitu I see... thanks for the info!

Truth be told, I prefer the old text notifications anyway, so I'll be turning off the widgets posthaste.

@neutrios

I have a DragonRise Inc. USB Encoder and haven't had any issues mapping the buttons in Retropie 4.6 on a Raspberry Pi 4 4GB

the config is here ...

/opt/retropie/configs/all/retroarch/autoconfig/DragonRise Inc. Generic USB Joystick .cfg

and inside the .cfg is my button mapping

input_device = "DragonRise Inc. Generic USB Joystick "
input_driver = "udev"
input_enable_hotkey_btn = "6"
input_l_btn = "0"
input_load_state_btn = "0"
input_up_btn = "10"
input_left_btn = "11"
input_state_slot_decrease_btn = "11"
input_select_btn = "6"
input_right_btn = "9"
input_state_slot_increase_btn = "9"
input_r_btn = "5"
input_save_state_btn = "5"
input_y_btn = "4"
input_x_btn = "3"
input_menu_toggle_btn = "3"
input_down_btn = "8"
input_start_btn = "7"
input_exit_emulator_btn = "7"
input_b_btn = "1"
input_reset_btn = "1"
input_a_btn = "2"

@Chapster5 Thanks for sharing your solution. 👍

Thanks as always for the swift response.

Should be fixed now, just update your RetroPie-Setu script and re-install (from source).

@MarcuFinx76 Nevermind, I ended up finding the option for it in the retroarch on screen display settings. Again, sorry for the double posting

Sorry, i put one in wrong place and i couldnt delete it

@badviper Would you please advise what steps I need to take to make my retrolink usb controller work with n64?

Do I need to use lr-mupen64plus-next? I selected lr-mupen64*-something*

Do I need to modify /opt/retropie/configs/n64/InputAutoCfg.ini?

Do I need to reboot or only restart emulation station?

I don't understand the GUI option for selecting a Select button since my controller doesn't have one but games need that, right?

Any other steps?

Thank you!

@quicksilver hdmi_enable_4kp60=1 works fine :)

pi@retropie:~ $ ./checkPi.sh OVERCLOCK: core: frequency(1)=549993152 v3d: frequency(46)=750001472 arm: frequency(48)=2100515584 FIRMWARE VERSION Feb 4 2020 12:06:47 Copyright (c) 2012 Broadcom version 53597a93bd1906c9358277b08bff097299216004 (clean) (release) (start) OS VERSION Linux retropie 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux

l8r I'll check some performence ...btw if ur having a good cooling system force your games to run at governer mode.

quoted by buzz
"If you want to set the performance governor when running games, that is already supported
https://github.com/RetroPie/RetroPie-setup/wiki/runcommand
(It sets it on game start, and restores previous setting on game exit)"