@twistednerd said in jusubb controller wont reconnect bluetooth:

Jusubb bluetooth controller https://tinyurl.com/xew8fzds

Your link is blocked by the my PiHole installation - can you post a direct link ?

can connect and configure controller but when I reboot it will not reconnect no matter the connection method used.

If you shut down the controller and start the Pi first, does it connect when you start it up again ?

@parkingmeter said in Fresh install on a pi b3+ fails to start emulationstation:

Are some resolutions not supported? What else would cause this to work on some screens but not others?

It depends on the list of resolutions reported by the display, but for a TV the usual NTSC/PAL 'resolution' are usually supported by it and by the Pi. A Pi 3b+ supports up to 1080p, if your display doesn't offer anything less (i.e. 4k only) then it's not going to work.
If you run from the terminal, after the error is shown, the command:

tvservice -m CEA tvservice -m DMT

what's the output ?

@wtstreetglow1 Just letting anyone in the future know that after my research. Final Burn Neo games still go in the fba rom folder and mame 078 go in the mame-libreto rom folder

I have the same problem i downloaded BleGamepad and it says same eror it dint connected even once

it's working! fantastic! thanks!

For people that end up seeing this in the future. I ended up using the below as my final solution for music- simple, has necessary features- just watch the install video at his website:

https://retropie.org.uk/forum/topic/25125/how-to-add-background-music-in-just-5-commands/2

Hi @KingZambo

Amiberry did have an issue and has just been fixed in v5.6.4 that was released yesterday. I'm updating as we speak and will hopefully be back on track.

For puae-2021, I amended the gamelist.xml and added an entry that points to my .hdf file. After I realised my kick roms were named wrong (I had to remove the .rom extension.... Doh!) then puae-2021 is now working.

@mitu thanks a lot. 5.6.4 has been released with many fixes indeed!

@retropieuser555

Oh.

All I saw was the Pi 4 requirement on their web page.

Poops.

@windg
It does make no difference. Display patch is installed too. But the problem is no longer so important to me. But thank you very much =)

@mitu @RapidEdwin08 I had tried to use the A key I had selected above but it didn't work. I finally got it set up but I don't know what if anything I did differently.

I think I got both the keyboard and controller working and moved on to getting the Atari 5200 games to work. That's also a lot move involved than I would have thought but I'm working my way through the documentation.

Thanks for the help! I really appreciate it.

@wtstreetglow1 It looks like reversing the slashes on the first (windows) share got this working.

It should have been:

//WESTONSPC/roms

@mitu
Hi
Thank you for your help.
I will try and rebuild the image from scratch.
Thanks again.

Lee

@mitu thanks. I'll try this option and see if it helps. I'm using advmame because I'm trying to get a good looking vector setup. I've been cycling through all of the emulators to see which gives me the "best" results.

Update your Retropie-Setup script and then reinstall the PC98 core and restart EmulationStation - after this the .fdd extension should be recognized by EmulationStation automatically.

@StewDapples

My advise is not to mix mame and fbneo roms just keep them in separate folders.
Otherwise you can't keep track of which is which.

About new roms and emulator releases.
I would not spend hours and hours finding which rom still works and which needs updating if not necessary.
I would just backup all and get all new ones and filter them again which is much faster.
For lr-fbneo this would be easy as I explained.

For lr-mame2003plus I don't know.
I could be wrong but for lr-mame2003plus I don't expect many updates.

I never used CLRmamepro so I can't help you with that.

@thisisnotdave said in Retropie on Khadas Edge 2 running Armbian can't get sound in games to work over HDMI:

Is there a way to supress the VolumeControl::getVolume() - Failed to get volume range! error I see every time I launch a game?

Change the Audio Device setting in EmulationStation's Audio menu to Master or PCM and this should get rid of the warning.