@baviaannl Maybe the youngster came back and re-mapped the buttons by mistake :).

@paf said in Verification error when writing RetroPie on SD card:

AFAIK

Verification errors tend to mean fake or bad cards. Here is my order:

Format the card - SDFormatter

This is important and dont forget that some cards are not compatible with the pi. I have formatted other ways before and have found that success is hit and miss. This tends to work every time for me.

Download the retropie image for your chosen device either zero etc or 2/3 and unzip it to reveal the iso. If using Etcher - you do not need to unzip - have you tried this?

Using Win32disk imager, browse to the image and click write making sure that the correct drive letter is selected.

Boot. A solid red means fail. If your lights start blinking then look at these meanings

This is fast process. I have never had an issue. I use Sandisk cards 16-128GB and their own cradle - class 10 though, I find class 4 glitches for more intensive tasks. I have also used various usb sd card cradles. Can you describe your exact operations? Do you do this order?

The MAME 0.78 debugger code may not actually be functional in the MAME 2003 core. Someone else may know that for sure.

If you haven't, I'd suggest that you try the hacked ROM with the original MAME 0.78 software before trying to set up lr-mame2003 in order to have a baseline.

In case anyone else stumbles across this. The issue appears to be resolved with the latest update. I updated from source today and my mouse cursor is functional and visable now in lr-vice.

@juankaever

for 5 inch LCD

edit on /boot/config.txt.

search, replace and add this

hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
hdmi_drive=1

save and try boot again

Very useful information. This helped me figure out a similar issue I had.

@alturis oh wow. I didn't even notice that. good catch.

@hawkeye448

https://github.com/RetroPie/RetroPie-Setup/wiki/Spinners,-Trackballs,-Lightguns,-and-other-Mouse-Devices

@hovnou787 said in games/emulators wont work pls help:

i just need help with where i can download those zip files

https://retropie.org.uk/forum/topic/2/forum-rules

I'm kinda in a rush

Retropie requires you to read the instructions that are comprehensively written and it's not a boot and play solution. If you have no time, it's the wrong project for you. 99% of all your questions are covered in those docs.

@mitu thanks for the tips!

sounds like your memory stick just failed. It happens, and probably has nothing to do with retropie or the raspberry pi. just coincidence.

thank you so much. i searched for like 2 hours for a solution before posting and that was super easy fix. again thanks a million

@astridrondero read the link / guidelines posted above (and agreed to when registering on the forum) and start a new topic providing the information requested.

Same thing for me. Plugged into my Insignia 1008p TV in my office it looks fine but plugged into my 4K Sony TV I see those red lines and red dots all over the place. No idea why its doing that. Using official pi power supply on a Pi2. Tried 2 different HDMI cords, same issue on the 4K tv.

@proxypunk said in SMB mounting only works at command line!:

Makes sense...
Feel free to throw RTFMs at me. ;)

I'd rather throw books about basic logic at you. ;)

@mitu

Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-genesis-plus-gx/genesis_plus_gx_libretro.so --config /opt/retropie/configs/megadrive/retroarch.cfg "/home/pi/RetroPie/roms/megadrive/Castlevania - Bloodlines (U) [!].gen" --appendconfig /dev/shm/retroarch.cfg

@herb_fargus Being a long-time *buntu user, I'm absolutely with you on the root/sudo issue. A note may prevent some questions, though. Do as you please. :)