No, there is no such configuration available - the screensaver exits on any input (unless you have enabled the 'Screensaver control' option, when they either scroll or start the game).

Is that a message from your monitor ? Does it turn off after it shows this message ?
Please add more info about your setup, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.

Do you have a custom EmulationStation configuration file for systems (es_systems.cfg) ? Please add more info about your setup, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.

@jgeibel @wossquee Not sure if you still care about this, but this is now possible by using the new retroarch core dosbox-pure. Just tested it out and now I'm able to get this pinball game working vertically on my cocktail table setup. Now to add 2 flipper buttons on the side so it plays like a real pinball table.

Also note that I had to change the IRQ setting to use IRQ 5 instead of IRQ 7 (the default) to get the sound effects to work.

@roslof

That did the trick! Thank you. I guess since I looked at the folder path in windows explorer, and it spelled "RetroPie" in lower case as "retropie" I assumed that would be the correct folder name. Thanks for you help!

@alinktotao said in Anyone know how to set up N64 raphnet adapter with the "raphnetraw plugin" on RetroPie??:

@mitu said in Anyone know how to set up N64 raphnet adapter with the "raphnetraw plugin" on RetroPie??:

Looks like the input plugin is detected and loaded, but the plugin errors out while opening the controller:

... Opening device path: '/dev/hidraw2' Input Error: Could not open gcn64 device serial '109634'. Skipping it. Input Error: No adapters detected

Maybe there's a permission error ? Check if the /dev/hidraw* devices are available to the pi user, by running the command:

ls -l /dev/hidraw*

pi@retropie:~ $ ls -l /dev/hidraw*
crw------- 1 root root 244, 0 Aug 7 18:58 /dev/hidraw0
crw------- 1 root root 244, 1 Aug 7 18:58 /dev/hidraw1
crw------- 1 root root 244, 2 Aug 7 18:58 /dev/hidraw2
crw------- 1 root root 244, 3 Aug 7 18:56 /dev/hidraw3
crw------- 1 root root 244, 4 Aug 7 18:56 /dev/hidraw4
crw------- 1 root root 244, 5 Aug 7 18:56 /dev/hidraw5
crw------- 1 root root 244, 6 Aug 7 18:56 /dev/hidraw6
crw------- 1 root root 244, 7 Aug 7 18:56 /dev/hidraw7

OH MY GOOODNESS!! THAT DID IT! THANK YOU SOOOO MUCH!!!

Not to resurrect a dead post, but this was the first helpful result in a quick search so I'd imagine others would kand here as well.

For me the issues was the keyboard mapping. I didn't realize it was off until I went to manually edit a /etc/network/interfaces.d/99-wifi file to add the lines referenced above. Vi was acting weird because of the mapping being off.

tl;dr make sure all of the localisation settings are configured prior to doing the wifi setup.

@16bit as other stated already there is no need to use YAPE. However, from my experience some of the more recent homebrew games only work with YAPE. You may consider this guide [1] to install retroarch xplus4 and YAPE alongside.

[1] https://retropie.org.uk/forum/topic/30671/howto-press-play-on-yape-making-the-most-out-of-c16-plus4-emulation

@bluescreen said in Made BIOS, ROMS, CONFIG reachable from windows... it's possible ?:

This tool is very Useful

https://www.paragon-software.com/home/linuxfs-windows/

you can mount your sd card and uses like explorer

in the recent pass i have read some information about similar software..... it's speak about it's only for read access but apparently this add a feature or driver can add to access ext4 partition also from windows explorer :)

I always wondered if there were any similar plugins for a "basic" file explorer like Total Commander or similar :)

@tygron

I can't help you with th ip issue but I can help you with the audio. I took me hours to figure it out. Add this to the moonlight config file:

audio = local

Then the audio will come out of the raspberry pis audio jack.

@slappy No, not really. It's cosmetic as much as I can tell so I let it go.

@chainsaw1968 Retroarch config is /opt/retropie/config/all/retroarch.cfg
https://retropie.org.uk/docs/RetroArch/

@bollwerk said in Dreamcast ROMs suddenly not working, controls messed up and grey box before each game no longer appears.:

The OP didn’t make that clear.

That's why we ask for the info in https://retropie.org.uk/forum/topic/3/read-this-first.

@dankcushions Thanks, I'll try the video thing.
I'm very sorry to hear that the splash screen is not solved!
I'll wait for the next update.

@muldjord I just tried it and it works as promised. Thanks again!

@mitu That did the trick! Appreciate all the help!

Thanx @Fiddla01 Fiddla01 for the new threat that brought us a solution.

@mitu that saves me a lot of sleep.

Not perfekt but a way i can live with it