@mitu it works now
i need to get a better bluetooth addapter its sorta delayed when all 4 controllers are connected but other than that its fine

@Sano
Wow!...
Yes, this is most likely it. Found this discussion on the same topic.
https://gamefaqs.gamespot.com/boards/563442-mega-man-2/57431396

you need to reinstall settingsmenu from setup on cli, although you can just wait for later today when 3.0 comes out.

@dankcushions
thanks it worked :)

@Thorr69 said in The Neo Geo emulator does not find the bios:

@Rubencn1234 Put it in the same directory as the roms. If you put it in the BIOS directory, it doesn't seem to find it. I had to put it in the roms directory (with the correct name) in order for it to work.

Which emulator are you using? FBA works fine without "neogeo.zip" in the roms folder. I have it just in the BIOS folder.

@Rubencn1234 Check to make sure you have the right BIOS file. neogeo.zip needs to be ~1.5 MB and CRC-32 should be 20F12195

@BuZz Yeah, it was that probably. I think it is solved now, thanks much.

sory here is the full link to the setup intructions for the amp: https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/raspberry-pi-usage

@Jae-Sang-LEE hello, and thank you for your help. how do i save it to work on startup? when i type "fbcp &" and press enter, it works! but when i reboot my pi3b, it goes back to the black screen. i know this post is old, just thought you might see it, thank you for any advice in advance and have a great day today!

If I were to hazard a guess, I would say that changing over to a USB boot means that your USB ports are staying powered on when your system isn't running. You should probably just unplug the power source after shutdown.

@MM007 It happens. I've come to realize that about five minutes after I request help I'll almost always figure out the solution.

@benbaron

FWIW I read on another forum about someone havin the exact same issue with Wii U Pro controllers. They ended up buying a dongle and it resolved the problem.

I just found that out that it only works if my audio amplifier is shutdown. I have no idea since that both adapter and amplifier are self powered.

If I turn it on after the screen is show there is no problem, if on at the same the pi and monitor are turned on no image :(

I have this controller, It is the case linux does not have the usb dongle drivers it works fine in the usb though without the wireless adapter

@aatheronb pay attention in class instead of trolling the forum

@Lolonois Thank you so much
this was the kind of information i was looking for (",)

i have seen this info a little later than i had hoped, but i just ordered myself one of these
https://www.ebay.co.uk/itm/F7A5-Output-5V-12V-24V-Switching-Power-Supply-Adapter-For-Arcade-Game/303072398956?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D99aac9499dfb4225b56ee8f92564984a%26pid%3D100675%26rk%3D2%26rkt%3D15%26sd%3D132922393594%26itm%3D303072398956&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3Ae5a0cda2-3c28-11e9-b0ec-74dbd180e49a|parentrq%3A3984c39f1690ab67099da24cfffd2b27|iid%3A1

As far as monitor heat extraction, no it wasn't something i had considered but now you've mentioned it, it's something i'll need to look into, so again thank you for your help and guidance i really appreciate you taking the time.

I am not sure if you are still having the same issue, but I was experiencing the same thing after the latest update. I was able to fix the issue in the input settings by setting throttle, frameskip dec, and frameskip inc to ‘none’ (which can be achieved by hitting esc). For some reason when hit joystick directions I was randomly registering F## keyboard presses as well. I noticed this when binding some other controls. Not sure why, but those options above are tied to f8, f9, and f10 and seemed to be causing the problem.

I hope this helps.

It wasn't at the time, no. I dunno what the problem is.