@sirhenrythe5th said in Jump to saved state:

@sleve_mcdichael in this great Museum you have the choice of several points to jump in.
The latest savepoint is just one.
So how can we get to the point of choosing between multiple savepoints to jump in without using hotkeys?
I would try to write commandlines as stated above and add them to the gamelist.

You could use a bash script to copy the desired save state file to the required $SRAM_PATH.auto filename before launching with the savestate_auto_load setting enabled.

@Trendkiller-9 Glad you solved it :D

Let's try to test the stable versions of pcsx rearmed(r23) .
You have to modify the pcsx-rearmed.sh

Run from terminal :

sudo nano ~/RetroPie-Setup/scriptmodules/emulators/pcsx-rearmed.sh

and modify the line

rp_module_repo="git https://github.com/notaz/pcsx_rearmed.git master"

to be

rp_module_repo="git https://github.com/notaz/pcsx_rearmed.git r23"

To save the settings press ctrl+O and ctrl+X.

@ignatius said in RetroPie on a ODROID XU4 issues:

Hi. I followed the instructions on how to install it (RetroPie) as per,

And, now, when I reboot the system I don't get emulationstation.
But, when I run "emulationstation" from the prompt I get these messages:

Dec 10 09::16:02 lvl0: Error initializing SDL!
No available video device
Dec 10 09:16:02 lvl0: Renderer failed to initialize!
Dec 10:09:16:02 lvl0: WIndow failed to initialize!

One note, though, I chroot'ed the Micro SD card on my Linux system, and did the majority of the installation on it. Because I simply cannot get WiFi working on the machine.

So, does anyone know what I may have done wrong?

Thanks for any and all help. It's grately appreciated.

Ok. I give up.I decided against installing RetroPie... and am now using Ares (RetroArena). So, i'll be cancelling this entry.

@geese-howard said in MAME 0.247 in RPi3:

Anyone uses it from https://stickfreaks.com/mame?

There is a spreadsheet showing a good performance using latest build - .0247, however i dont know how to install it.

If you wait a week or so the mame0.247 will be as binary in the RetroPie-Setup and you know it will work for sure without a lot of hassle.

But if you really want to try you can easily use it.
Be aware of the fact that the binary can fail with some distributions.
Not sure it will still work on Buster 10 distributions, but you can try.

If you have already mame installed earlier from the experimental section, which makes sure all dependencies and configs are installed, then you can just download and copy the files from within the zip file to :
/opt/retropie/emulators/mame

Optionally you can rename the old folder, earlier on, from :
/opt/retropie/emulators/mame to /opt/retropie/emulators/mame.bak for example.

You have to do the commands as root with sudo.

@berlinhimmel Unfortunately not, quite a lot of games on consoles have different memory processes for the NTSC and PAL versions, so the saves aren't swappable.

I have the same Controller and it is working fine here with 4.8.2 .

Let's try to reset input configuration:

RestroPIe-Setup > Configuration > emulationstation > Clear/Reset ES input configuration. After that, restart and configure again the controller.

Also, the controller have a small button in the back, set this to X position.

Ok, the 5.15.? Kernel didn't work well. I had some screen dropouts again.
I then tried 5.10.60, which still had the screen tearing issue in Exult. After that I installed 5.10.64, which eliminates the screen tearing. So one of the commits between those versions fixed that. I will test this kernel further in the coming days and report back.

@sleve_mcdichael

awesome. After doing some additional reading, I think i kinda get it.

I have the basic grid working in a few themes that seem like they'll do what I want.

I'm now trying to figure out if I can minimize the space between the art, increasing the viewable size of the image, and will possibly add the "marquee" back onto the image. The last part looks pretty easy, really.

Do you know of any particularly good grid themes? tronky and material seem to be the best "out of the box" options. I like the look of carbon, but I wish it had an area for game details.

really appreciate everyone's help here.

@polygaryd you were replying to a reply from 2 years ago, from a thread originally started back in 2016. it's not helpful to bump ancient topics because they can contain a lot of outdated/wrong/irrelevant advice. if you have an issue please post a new thread.

@arelav @Manic-Miner-123 I spoke with the author of some specific games a while ago. (RIP John Wilson, the Rochdale Balrog).

He found some sort of bug in Fuse. It appears the fault is in the loader when line 13 calls the 'randomize usr 65020' routine ... Fuse fails for some reason.

He actually rewrote the loaders for Balrog and the Cat, Behind Closed Doors II and One of Our Wombats is Missing so the games will load. I don't know if there are any other developers' games which are affected by the oversight.

Where the game is keyboard dependent, like text adventures, I use Fuse, not libretto Fuse (lr-fuse.

Most .tzx games should work though - where they don't it's usually the case that you need to select 128K machine or Spectrum +3.

In rare cases, but especially Russian games, you need to select a machine like the Pentagon and specific instructions, such as for TR-DOS.

@mitu Thanks! I found the real issue why it was not detecting after some research. Three points to note:

My Pandora 3d's top USB port must be used to connect with Raspberry pi4. Pandora must be powered ON to detect the controller. Once Pandora connects, Pandora goes to "Controller" mode(a full screen message shows up) and disables its controller on Pandora but activates on raspberry pi.

Now, I am using both systems on my arcade cabinet side by side using an HDMI switcher.

Hopefully these would help other people. :)

I've been using rclone-v1.56.0.

Latest release suggests v1.59.1 is available, but I don't know if that is really needed.

Just curious if this is now definitely required due to changes in protocols or whatever.

Please and thank you.

@mitu

OK, finally figured it out!

https://stackoverflow.com/questions/25149143/linux-kernel-consoleblank-argument-ignored

Needed to add export QT_QPA_PRESERVE_CONSOLE_STATE=1 to the autostart file. It seems the consoleblank=0 gets overriden by Qt applications. Seems like a bit of an undesirable behaviour but glad it works now.