user@host$ diskutil list
/dev/disk0 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
https://freeaccountsonline.com/
2: Apple_CoreStorage Mac HD 499.4 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1 (internal, virtual):
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Mac HD +499.0 GB disk1
Logical Volume on disk0s2
3BAC0F9E-19F8-4AAB-8752-6514B573B497
Unencrypted
/dev/disk2 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *15.9 GB disk2
1: Windows_FAT_16 boot 59.8 MB disk2s1
2: Linux 15.9 GB disk2s2
user@host$

@bleckman said in stephen selph's Scraper Error Hash not found, emptry Picture boxes:

I updated but now It won't auto-log in
I have to do it every time I restart the REtropie

That happens a lot after updates - here you go =>
https://retropie.org.uk/forum/topic/18591/asking-for-retropie-login-on-boot-after-update/15

@junito Your post does not contain any content - you can edit it and add the errors you're getting or the screenshots you meant to add.
Please also include the info requested in https://retropie.org.uk/forum/topic/3/read-this-first, it's useful to know which release/hardware/controller you have.

@granderjoree Looking at the Carbon theme, I think it's enough to create another folder with the collection name, with the same structure as a system folder.-
For instance, copy the snes folder from the theme folder to your collection name folder (i.e. megaman), then modify the art (.svg) files inside the art subfolder with the images you want.

@md201 Looks like my directories were off. Adding the simple /home/pi/switch to all os.system commands did the trick............ :(

Got it working, should have explored the set up more to see I needed to install the USB ROM service.

Thanks

@cyperghost The output of my raspi-gpio get 3 was "level=0 fsel=0 func=INPUT", but if I put it in line 322 the Pi always turns off as soon as emulationstation loads, even if completely disconnected from the case.

However, I just realised something... the power socket on the MEGAPi case it's not just a cutout, like the HDMI port, but it has its own little board, I didn't notice until now, I just mindlessly plugged the power directly to the Pi, and that was the problem, the multi_switch.sh now works perfectly. Sorry for wasting your time :( (however, the fact that multiswitch086.sh almost worked without using the power board was in itself impressive).

As a partial way to make amends I'll correct an error on the installation instructions of the script:

Here you have to add a sudo before chmod, otherwise it gives you "permission denied"

wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/multi_switch.sh && chmod +x multi_switch.sh

@bullethead said in Issues with Skyscraper:

Thoughts?

Just do it ?

@saccublenda @mitu Hold on there is a solution

@xreser Please post more info about your set-up, as requested in https://retropie.org.uk/forum/topic/3/read-this-first.
What theme are you using ? Can you post a fragment of your gamelist.xml file with chinese characters ?

@jmanricecakes Hello. How do you fixed your drivers going where?

I have the same errors but I have Odroid XU4. What exactly you did to fix? Or what to edit?

@mitu

Yeah, I don't know. Maybe I'm missing dependencies..
Well thanks for helping anyway. It's appreciated.

Found it there. Thank you.

@solisae Emulationstation does not initiate any connection, it's the OS (Linux) underneath that handles the connection. Try removing the bluetooth device (the controller) from the configuration screen and then re-pair and connect it again. Leave everything else on default and finish the configuration, then see if the behavior remains.

@jasonh1314 The ascii art welcome is produced by running retropie_welcome, a shell function added by the install script to your shell start-up file.
If you open the $HOME/.bashrc file, the last lines should be

retropie_welcome # RETROPIE PROFILE END

If you accidentally overwritten your .bashrc, then the welcome ascii art function is not run when your login session starts.

Copied my tron.ini file to location /opt/retropie/libretrocores/lr-mame2003-plus/metadata.........it didn't work.

@mitu Rebuilding from source fixed the issue. I have a feeling that when RetroPie 4.5 comes out I'm going to have to do a fresh install, my days of doing the updates and ignoring the "this isn't compatible with Jessie" warnings are numbered. Thanks again all.

@mitu said in Sound card selectable from emulationstation:

Press Start and look at the menu - the version is at the bottom.

Ups, it was really simple: v2.8.2RP

@mitu said in Sound card selectable from emulationstation:

you can add your command line toggle at the beginning of the of the autostart.sh script

Thanks, I'll try to do it with this script while I'm still investigating if it's possible to get this from the Emulationstation UI