@sleve_mcdichael said in USB FILE STRUCTURE:

nto the

Awesome again dudes thankyou very much

@sleve_mcdichael I'm using a fork of retropie that doesn't allow this, well it allows it it just defaults every settings changed on reboot, so I need to do this via the hardware

@mitu Thanks, updating the script and reinstalling helped.

Please add more details about your setup, as requested in https://retropie.org.uk/forum/topic/3/read-this-first.

@giovanni11 said in world rally 2 gaelco dual screen problem:

After starting mame I pressed the TAB key and this menu opens, clicking on "dip switches" I have the possibility to change monitors 1/2, but I tried and selecting "monior 1, then the emulator always restarts with two screens

Well, then I'm afraid I can't help you. I know nothing about MAME64UI on pc. I play the game using FBNeo on a Raspberry Pi 3 and the monitor setting does pertain in that.

I do believe there's an FBNeo version for Windows, but I also don't know anything specific about that.

@maschine Replying to an old message here, mainly in case others are looking for the same.

If you want to fully disable the power button, then check the manual for this case. It describes a hardware jumper that can be set to fully disable the power button. Power will always flow to the RPi4B board.

By setting the jumper to pin 2-3, the device will be in always on mode.

25e9ca3f-0635-467c-a56f-d039db2e045c-image.png

@alikatado88 i had a similar effect with a bad HDMI-Cable.
Is the one you use with your 55" the same one that you used with the PC-Monitor?

@YFZdude You are right that the N64 was released before the Dreamcast.
But the development of the FF-Function in Input-Devices was initiated by SEGA for the Saturn, but came later with the dreamcast.
Nintendo was the first to bring it to the market after copying the idea (similar to the development of the mouse-controlled interface, which was seen by Bill Gates & Steve Jobs at their neighbour XEROX in Silicon Vally back in the 70s :D)

You can use the scripting support in EmulationStation to run a script when a game starts/stops. See here. You can call your display script when the game starts, then another one that clears the screen when it stops.

[...] The background music fails to play in both enabled and disabled modes - and this message is displayed in the top corner of my screen:

Nov 23 10:21:35 lv10: VolumeControl::init() - Failed to attach to default card!

Out of the box, RetroPie doesn't have any background music functionality, is this a 3rd party script that's running ?

.. If anyone can point me in the right direction I would be hugely grateful.

Are you using a 3rd party image or the RetroPie image from https://retropie.org.uk/download ? The official RetroPIe image doesn't have this issue and we don't support 3rd party images here in the forums.

Please add the info requested in https://retropie.org.uk/forum/topic/3/read-this-first to be able diagnose this further.

@dmmarti : Thank you for the hint, that was part of the solution that worked for me.

I did notice, that settings are not permanent and was in luck to find the entry „Update Input Remap File“ in the table „MANAGE REMAP FILES“.

@Floob : Thank you for the link to the documentation and mentioning necessary input_libretro_device_p3 settings.

In another libretro discussion I also found settings for _p1:

Input_libretro_device_p3 = „259“

Now I can also use my xbox controller.
For the „259“ setting, I couldn‘t find an explanation in the documentation. But now it works and I slowly start to understand what‘s necessary, to get other games running.

@ all : Many thanks for your instant support and helpful input!

@GameCodingNinja if you installed retroscraper.sh as I've shown, you should see a menu under retropie setup, optional packages, near the bottom, retrosctaper. Go to the configure option and it should be very easy to use.

@Addison maybe

http://www.gerrelt.nl/RaspberryPi/wordpress/equalizer/

https://www.hifiberry.com/docs/software/guide-adding-equalization-using-alsaeq/

@mitu thank you very much once again!
I updated RA yesterday, but will do again.
Strange that this .info-file gets corrupt sometimes and by far more often it has to be ok (Ratio Games load: Games do not = 8:2).

Thank you sir!

FYI: RetroArch has been updated once more to 1.13.0 (visible in changelog, not on the homepage)

@lostless Yep, the wireless router, PS5, pi, Nintendo Switch and smart TV are all within a couple meters of each other in the living room. Like I said, I didn't experience any issues using the pi upstairs. Thanks for your help here, I never would have considered that to be the issue.

I might just have to go wired when using the pi in the living room as I don't have an option to move the wireless router.

Thanks you I'll give that a try.

Just started working not sure why? Maybe just needed a good reset.

@mitu it's the macintosh folder, and here's the contents:

-rwxrwxrwx 1 pi pi 0 Nov 15 02:31 Desktop -rwxrwxrwx 1 pi pi 209715200 Nov 20 11:22 disk.img drwxrwxrwx 1 pi pi 131072 Nov 19 13:41 .finf -rwxrwxrwx 1 pi pi 1048576 Sep 14 2010 mac.rom drwxrwxrwx 1 pi pi 131072 Nov 19 13:41 .rsrc -rwxrwxrwx 1 pi pi 0 Nov 19 09:18 start.txt

Inside of the .finf directory appears to be a duplicate (symlinks?) of the macintosh directory:

-rwxrwxrwx 1 pi pi 32 Nov 20 11:22 Desktop -rwxrwxrwx 1 pi pi 32 Nov 19 11:38 disk.img -rwxrwxrwx 1 pi pi 32 Nov 19 11:38 mac.rom -rwxrwxrwx 1 pi pi 32 Nov 19 13:41 start.txt

Inside of the .rsrc directory has another Desktop and start.txt file:

-rwxrwxrwx 1 pi pi 321 Nov 18 23:32 Desktop -rwxrwxrwx 1 pi pi 0 Nov 19 13:41 start.txt

I checked the start.txt files and they are both empty, so it must be in the basiliskii.cfg or other config file to dictate which backend it's using, and maybe if I'm lucky... I can manually define my resolution there? And maybe I can clean up the "start" listings and/or rename that? Can you point me somewhere to teach me about the use of start.txt files in RetroPie? I can't seem to find it in the docs.