@mitu Thanks, I'll try that. As for the script. It needs to be run to start the lightgun service to get the lightgun working. Only needs to be run once though. I think this is just a work around at the moment. Hopefully, once the sinden lightgun gets established, it will be integrated better with retropie.

@yserra

Ahhhh, so if I had the .adf files I could just zip them all up and they should work, is that right?

Thanks for pointing out the simple mistake and putting me on the right path.

@turrican2k i run it in no desktop enviroment with the -f switch but it shows in a small screen in the middle,how you make it run in fullscreen?

@daviddraper Hi do you know if I can access the RetroArch menu via the keyboard?

RetroArch doesn't have the concept of a system, this is a front-end configuration convention (EmulationStation/runcommand). So you'll either have to modify each system's config or use a global save folder and hope you don't run into a situation with identical ROM/game names for multiple consoles/platforms.

Probably yes, but you could ask the author of the RetroPie CRT Ed. for confirmation to know which systems it supports.

Are you sure your USB drive is mounted as /mnt/Retro Drive ? Is the user that's running EmulationStation (RetroPie installation user) able to access the driver and its contents ?

@simpleethat said in launchingimage adding a white background to png files:

...create launching images that would display the control scheme for every game (but that's way more effort than I really feel like going through).

That's exactly what I did for Arcade titles (with a copy of PhotoShop and a PC), but it's a big time investment. I did about ten/fifteen "major" games and then figured I'd get to the rest eventually.

I'm able to "re-use" some work for games that have the same controls. (e.g. Pac-Man and Ms.Pac-Man both use the "no buttons required" image) I also tried to make the button naming generic so that I can re-use images. If the buttons for "shoot" and "jump" are in the same place then I re-use the image. So far I've done early arcade titles which simpler control schemes.

@dankcushions perfect! That saved me a lot of time since I deleted some content before I started to think of possible consequences :)

@mitu I think at this stage a clean reinstall is imminent. Your help and advice is very much appreciated though.

@simpleethat Your right its using an lr on psx games

@markyh444 said in WiFi dropping on reboot, weird x00x00x00x00 networks...:

@dochartaigh if you search for nearby WiFi on say like your phone, does that random network show up as well? People near me name their wifi some right random things.

My mate used characters and symbols to draw a sword for hers previously.

Nah, that weird x00x00x00x00 never shows up no matter the non-Raspberry device I search for networks on. The RP4 also showed there being like 2+ different x00x00x00x00x00 networks at the same time a couple times: https://i.imgur.com/YukMVcW.jpg

ALL other devices, unlike the RP4, also ALWAYS see my 5ghz network, from my phone, to tablet, to Kindle, to my friggin Nest thermostat and Amazon FireStick, etc.

The RP4 doesn't see that 5ghz network a lot, and commonly gives me errors when it tries to connect when it actually sees it. All other devices can connect to that 5ghz, which the RP4 can't a lot of the time even when it finds it). And this morning the RP4 didn't see a SINGLE wifi network of any type and they're tons around me being in suburbia. I have no clue what's going on lol.

The games you play should support a controller interface, most of them probably work with a keyboard and mouse and not exclusively with a controller.
There are generic gamepad-to-keyboard/mouse mappers, for Linux I know about antimicro, but the best solution is for the game to natively support a gamepad.

@mitu That's the funny thing. mpg123 IS part of BGM so uninstalling BGM uninstalls both (hence the loss of music completely) but uninstalling mgp123 by itself removed its config I suppose. I manually plugged the info back in and left BGM out this time around and finally got it working. Thank you for your reply.

@ashpool

Thank you for all your help.

I ended up settling on Mode 51 (the largest 4:3) resolution the monitor will accept, and choosing a 4:3 Theme. This makes is look "close enough" for the ES look/feel. Because this will be all MAME games, I have to set the DMT for each one, so luckily any changes to ES doesn't affect the RetroArch settings.

As for the Screensaver and Splash screen (currently a static image), is I will over-squish them in an image editing program so that when they are displayed on the 4:3 setting, they will look like the correct aspect ratio. At least that is the plan.

Thank you all for the help, support, and guidance! My first build and so many online tutorials make it look SOOO easy, yet the online community has been there with support, tricks and tips, and overall welcoming acceptance of noobs. Thanks again!

@cayce I don't know about your clone but I have an official Wii U controller and it is definitely Bluetooth. It is an odd version of Bluetooth though like the Wiimote. I have no experience of making it work on my Pi4 but on a Windows PC they require some fiddling/extra drivers. I've been using a Wii U Pro controller for CEMU on my PC.

I understand that they can be used as a wiimote (wiimote and nunchuck?) and I would like to look into using it as such when 64bit Retropie/Dolphin comes around. That will be some time off though.

@tedmaul No.

Same question - where is game data folder situated now?
According this manual https://retropie.org.uk/docs/Optimization-for-Nintendo-64/ the folder must be /home/pi/.local/share/mupen64plus/ but share folder is empty and game saves are located in roms folder....
So, where need to put hires_texture to apply it now?