@Lilyandy said in How to set 2 joysticks to control Play1 at the same time, and can set combo?:

input_turbo_btn = 1 or input_turbo_btn = "1"
But none of them have the expected effect, it seems that it may not work? XD

Eh, it was worth a shot.

@CoffeeOwl88 I know this is an old post, but I was also having the same issue.

Changing the over_voltage to 2 is what solved it for me.

@JimmyFromTheBay This has absolutely nothing to do with me since I don't use this emulator.

I just wanted to throw a "thank you" in here though for posting the answer to your own question after you found it. Google searches bring people here sometimes to find answers to the same problems they may be having and it's frustrating to see nothing entered or, worse, "I found it. I'm good."... then no explanation.

Thanks from the future! 😀

@dankcushions Alright, thank you very much for your insight. I'll keep trying to capture it on video.

@mahoneyt944

Hi......

i was about to open a new thread when i can reuse this instead....

You can suggest because the HOME button of XBOX 360 Wired Controller it's can not recognized and i can't bind it anythings to him ?

EDIT Solved I have disabled and removed the kbdrate service from sytemd. I have then recreated and enabled it again and I no longer get any errors and my U-HID works as desired.

Thank you very much again.

@mitu said in Set keyboard repeat delay:

That's because there's no such file, kbdrate is located at /sbin/kbdrate.

Thank you very much, I was trying to find the correct route, but there was no way.

Now the operation is as desired, the replay problem in the console and in the SDLPOP port has been solved. I have to test the rest.

The funny thing is that despite working, it still gives me an error at the start of kbdrate

● kbdrate.service - Keyboard repeat rate in tty. Loaded: loaded (/etc/systemd/system/kbdrate.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2022-08-04 19:17:26 CEST; 3min 0s ago Process: 456 ExecStart=/sbin/kbdrate --silent --delay 350 --rate 75 (code=exited, status=1/FAILURE) Main PID: 456 (code=exited, status=1/FAILURE) ago 04 19:17:25 retropie systemd[1]: Starting Keyboard repeat rate in tty.... ago 04 19:17:26 retropie systemd[1]: kbdrate.service: Main process exited, code=exited, status=1/FAILURE ago 04 19:17:26 retropie systemd[1]: kbdrate.service: Failed with result 'exit-code'. ago 04 19:17:26 retropie systemd[1]: Failed to start Keyboard repeat rate in tty..

@mitu said in lr-mame & lr-mess binaries:

Latest commit on the upstream repository is from May, 27 - I think the binaries are pretty close to the 'lastest version'. You can check when the binary was built and from which commit, just to compare with the upstream repo (https://github.com/libretro/mame).

Ah, I see that now. Looks like they're dealing with one heck of a pull request. I'll keep an eye on the upstream repo. Cheers, and thanks!

@Folly @JimmyFromTheBay YES!!!! This worked perfectly. Thank you so much for your time in helping with getting this system up and running. Very much appreciated.

I've managed to get somewhere with this. I was looking at the rom history on another website and it seems the dip switch function is broken in the driver. The workaround is to make the changes in service mode. I have tried this and can verify that it works. Changing them from the mame menu would be better, but as its usually only a one-off change, I'll live with it.

@Dipkid ok, it worked I opened the controllers and realized that many buttons weren't on the same slots and one of my joysticks was upside down. Thanks for your help.

Ok it worked. I just downloaded all the roms that were on retropie and it detected it

I guess ssd device is not unmounted correctly and marked dirty because it is always mounted again after I plugged it to windows.

@iss05e said in Amiberry - no sound through headphone jack:

The previous version of Amiberry inherited the Audio options set in RetroPie. I guess Amiberry v5.3 no longer does this.

It didn't, it was just a concidence that it worked. It probably just used the 'default' (which is set via the RetroPie audio settings).

I wanted update the manual way for anyone who needs to fix this in the future.

To run the script file you need to ```
sudo bash ~/RetroPie-Setup/retropie_setup.sh

Once the script runs 1. Manage packages 2. Manage core packages 3. retropie menu 4. update from binary If your missing the RetroPie-Setup directory, sorry you're going to have to reinstall. Hope that helps someone!

please~~
My host is Piboy DMG,
I want to connect two external joysticks, Play1 + Play2,
But I want Piboy DMG built-in joystick and external Play1 joystick to control Play1 together,The Play2 is another Play2 joystick, the joystick is PS1 specification.

1659585356430-s__29237252-1_1_1.jpg

1659597545896-2022-08-04_151404.png

Because when I set up the two joysticks, I also set the "Combo" button, the Play1/2 joysticks can be sure to combo, but the built-in joystick of Piboy DMG can be controlled but cannot be combo.

Ths.^^

@psun03 In addition to what @sleve_mcdichael said, you can see the name and location of the remap file in the log:

... [INFO] [Remaps]: remap directory: /opt/retropie/configs/arcade/ [INFO] [Remaps]: game-specific remap found at /opt/retropie/configs/arcade/MAME 2016/tokyowar.rmp. ...

@hooknc Sure, let it be logged there.

@tribunal88 I have a pi 3 in that case, and I've had it on for days at a time. As long as you aren't blocking the ventilation so they Pi can breathe, the fan alone should be fine.