It could be your joystick is oriented wrong plug the usb in windows and do a joystick test on there to confirm

set your controller again with emulation station

@skeggylads Please give more details about your setup as requested in https://retropie.org.uk/forum/topic/3/read-this-first.

@markt correct. As I said, and from reading your jstest tests, your joysticks are effectively being recognized as analogs correctly, it's just that they don't really map to the trackball the way you think they could.

You may try another emulator (lr-fba vs lr-mame vs AdvMame) and see if they handle it differently, or maybe someone has a different idea on how to configure it to make it work the way you want.

@azsorlex26 Each package exposes a standard set of commands to be executed - sources, build, install, remove, configure. Most packages have these options, there might be packages with special functions.
Look at https://github.com/RetroPie/RetroPie-Setup/blob/master/scriptmodules/packages.sh#L55 and https://github.com/RetroPie/RetroPie-Setup/blob/bfaedb92cb86335b7fec34d23fb39890455ae05f/scriptmodules/packages.sh#L162 to see how the retropie_packages.sh script works.

Anyone?
Like to test The Longest Journey too.
Compiled the latest daily source, but TLJ would not be recognized bei residualvm.

Added in "/home/pi/RetroPie-Setup/scriptmodules/emulators/residualvm.sh" the build parameter "--enable-all-engines" , but that does not work.

@eldgrim said in Strangerstuff issue with segacd.:

unfortunatly, the author no longer supports his creations

But fortunately all the code is only and anyone can submit pull requests ;)

ok thank you

I actually have the same issue. On my Samsung 46 inch TV connected by hdmi I get a delay of about 1-2 seconds on the ES menu when moving from game to game. I have game mode on the TV.

Come to think of it though, I have a Yamaha surround system that I have adjusted the audio delay(lip sync setting) because for some reason the audio was slightly off once I installed the receiver. I just disabled that option on the receiver for the Pi's HDMI output and it seems to be in sync now. Could this be your issue?

@kkokkinos There are a few GPIO based controller drivers available in RetroPie:

I think you're trying to use the mk_arcade_joystick_rpi one ? If so, then you need to install it first from the RetroPie-Setup script (it's in the drivers section of the packages) and then configure it - as described on the Github page of the driver. You can ignore all the installation steps and just look at the pinout and make sure you connected the wires correctly, then jump to the Loading the driver section.

There is no recalbox.conf file in RetroPie, that is part of the Recalbox image -a different project.

@ango Oh! My bad. I forgot about the standalone.

I believe pcsx-rearmed does only recognize SCPH1001.BIN. Seems like an addition is needed to the documentation.

@mediamogul now I got what was meant ;).

This is exactly what I was looking for and it worked, thanks a lot!

@greenhawk84 said in Mame2003 PLUS Dipswitch?:

003-plus on some of the game

goto options and set input interface to simultaneous

@backstander Thank you so much! Am digesting your answers and will get back to your with questions/pics for anything I don't understand.

@andrewh - That is quite acceptable, as I'm always using a wireless keyboard when dropping to command shell.

@dirtyd369 said in Error Code when booting and trying to exit the Config menu:

Is there a way to input the login info directly into the config file of the SD?

Unfortunately not. You'll have to either enable and use SSH and re-enable autologin again or find a keyboard to log in directly. See this topic for the autologin problem - https://retropie.org.uk/forum/topic/18582/auto-login-not-working .

Oh ok I fixed it I just had to reset the keyboard