I wonder if I was able to make a list of the games I need the USA region art for that maybe someone could make me a zip?

@mitu So I'm guessing I need to do a whole new install of retropie and emulation station then?
Thats what I was trying to avoid :(

@mitu perfect, thank you for the reply. I will check out the link and see what I can figure out. The audio devices don't need pins.

Thank you

Did you read the documentation?

@quicksilver perfect thanks.

@Alturis I didn't even think of that! My bad.
The case is 7.6 x 4.51 x 2.95 inches.

If this helps you, then I looked at the review on this site. There are other adapters there, but I'm not sure about them.
https://www.bestadvisor.com/bluetooth-adapters

Here are some handy links found

https://www.raspberrypi.org/forums/viewtopic.php?t=25933 https://raspberrypi.stackexchange.com/questions/46153/detect-hdmi-and-start-gui/46158#46158 (the guide from the Raspberry Pi site) https://www.raspberrypi.org/documentation/configuration/config-txt/video.md

You can start playing with the command and see if you can switch manually between resolutions, on the fly. If this works, then you can incorporate it in a script to be run at boot.

Well after bashing my head against a desk for an hour or so I finally gave up and posted the above, then figured out almost immediately what the problem was.

Appears at some point within FBA i had set up a core override that must have had resolution settings set up,

Deleted the override file and FBA immediately started behaving itself

Update

For anyone else trying this, I tried many different combinations of drivers and commands/scenarios. Including cycling through all the pairing modes. The best I seemed to get it was by pairing it into "Android B" mode, and from emulation station I was able to get it to recognize as a keyboard, but it only recognized a single button. Strange.

Did you setup your retroarch inputs correctly?
Otherwise you can hardcode your buttons in the retroarch script from your emulators.
The Playstation issue could be that the game doesn't work with a analog controller.

@maxbeanz Not without either a change to our dispmanx SDL, or a change to the fuse code. Not sure where the fault is. Or by switching off the dispmanx driver via retropie-setup (which could cause tearing due to vsync differences but will work fine.).

Ok the correct way is:

Turn on setting mode
Do a reset
Go to Setting up the soft dip > Slot 1 Metal Slug> Turn on blood
Navigate back and select exit
It should display DIP SW 1 OFF!!! or so
Then turn off setting mode in rgui

Edit: It should create a .fs file in the romdir.

@grant2258 said in mame 2003 dat wrong just to let you guys know:

im not sure if this is the right thread or if i should start another one ive made a little script to grab all the mame2003 game names from the dat and compare them to the catver.ini

I think this would be better placed in a new thread, as this one is about the MAME 2003 entry in the docs.

Hi,

I've recently put together a Retropie kit with RPI 3 and SN30 Pro controllers. I realise that these are not your controller and I'm pretty sure that this information came from this site, but in order for the controllers to be recognised as js0 and js1 they needed to be started in macOS mode (START+A), when used with the USB cables on a RPI. I also updated the firmware on the controllers.

There is a command line tool (jstest) that can be used to test them. Again there is are youtube videos on this (checkout Floob's vids)

@raulitob Check if you have a custom es_systems.cfg in /home/pi/.emulationstation/ and rename it, then restart Emulationstation. If you have the right ROMs in /home/pi/RetroPie/roms/coleco, then the system should show up in Emulationstation.
There is another - actively maintained - web manager for RetroPie, you should check out Webtropie.

@mikee You should update also the RetroPie setup script, the latest version is not 4.3.8. Do the update for the setup script, then update Emulationstation again.

@xvo Reicast doesn't have BBA emulation support. Demul on Windows is the only DC emulator that can play online, as far as I know.

There are premade disc images for Sylverant called PSO DC Ives Pack 2.0. They're all bugfixed, online and offline capable and ready to go. Not linking them here, obviously.

I'm sure there are other private servers out there too.