@mitu thanks for the info I didn't know there was one for windows similar to this will check it out

@abj OK great, thanks for the reply! That was what I suspected but helpful to have confirmation.

@Helm619

You can play neogeocd games with two emulatros:

lr-fbneo-neocd lr-neocd

For lr-fbneo-neocd :

Put the bios files [ neocdz.zip , neogeo.zip] into the BIOS/fbneo folder. Put the neogeocd games into the neogeo folder. Launch the game and choose from runcommand menu the lr-fbneo-neocd emulator.

Important instructions about this emulator: https://docs.libretro.com/library/fbneo/#how-do-i-launch-a-neogeo-cd-game

For lr-neocd

Install lr-neocd from experimental packages of retropie-setup Create in the Bios, a folder, with name neocd (Bios/neocd) and add the bios files [ neocdz.zip , neogeo.zip] Launch the game and choose from runcommand menu the lr-neocd emulator.

important info about this emulator: https://github.com/libretro/neocd_libretro

@bethory said in Retropie recognizes only one controller with the "USB Twin pad" adapter:

I created the file rp-usbhid-quirks.conf using the command sudo nano /etc/modprobe.d/rp-usbhid-quirks.conf and inside I wrote only the following information:
usbhid.quirks=0x05e3:0x1065:0x040

That's not what the file should contain. You use the usbid.quirks=... syntax if you add the info to cmdline.txt, for the modprobe configuration file the syntax is different (as explain the doc page):

options usbhid quirks=0x05e3:0x1065:0x040

The triggers_to_buttons is no longer applied automatically to the xpad driver , since it breaks the Xbox controllers mappings in SDL and subsequently any applications that use the SDL's GameController subsystem. Existing installs are not affected, but new installations will not get this configuration automatically, though you can manually add it and will stay configured.

EDIT: how did you try to map the Z/C buttons - to which gamepad inputs ?

I have already try to install the sixaxis driver following that link but the issue was not solved. This is the dmesg log after I connect the PS£ clone controller after the sixaxis driver installation (and enabled the 3rd party controller support).

[ 105.404776] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 105.535523] usb 1-1.4: not running at top speed; connect to a high speed hub
[ 105.537502] usb 1-1.4: New USB device found, idVendor=054c, idProduct=0268, bcdDevice= 1.00
[ 105.537527] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 105.537542] usb 1-1.4: Product: PS3 Controller
[ 105.537556] usb 1-1.4: Manufacturer: Sony
[ 105.613729] hid_sony: loading out-of-tree module taints kernel.
[ 105.624486] input: Sony PS3 Controller Motion Sensors as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:054C:0268.0002/input/input2
[ 105.695198] input: Sony PS3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:054C:0268.0002/input/input1
[ 105.696289] sony 0003:054C:0268.0002: input,hiddev96,hidraw1: USB HID v81.11 Joystick [Sony PS3 Controller] on usb-3f980000.usb-1.4/input0
[ 107.555250] usb 1-1.4: USB disconnect, device number 5
[ 108.734769] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[ 108.871539] usb 1-1.4: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
[ 108.871577] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 108.871592] usb 1-1.4: Product: Controller
[ 108.871605] usb 1-1.4: Manufacturer: Sony
[ 108.921260] input: Microsoft X-Box 360 pad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
[ 108.921977] usbcore: registered new interface driver xpad

I have already try to install the ps3controller driver, same issue.

Thanks and Regards,
Stefano

@Lolonois got to love linux.
so i did a clean load to start all my comparing and what not.
and now it works just fine.
even though on friday even with a fresh and updated RP it would not start a game

as you said. you need to update the RP script and update everything.

i did a fresh load and with out updating it didn't work ( as you said it wouldn't) then i updated everything to the same commit that you did and it worked just fine after that. No error

so i did a new card and fresh image
this time i just updated retroarch, that didn't work. (was not expecting it too)
did a full update and like before it now works

So i agree, it is working as it is designed, why it didnt work before for me. i will never know

@Retrodade sorry, as

@Lolonois said in Apple2e: AppleWin Libretro:

[INFO] RetroArch 1.8.5 (Git 8bcd74b)

As I mentioned already in another thread: With this outdated version you are on your own (v1.8.5 was added at 2020-04-17 to RetroPie).

Currently RetroPie is on retroarch v1.16.0, I tested lr-applewin with retroarch v1.12 onwards.

theres not much I and @Lolonois can do.

the only thing i can say if you want to get applewin to work. you will have to update your system.
as i said above, updating retroarch to the latest which it 1.16.0 will not make it work. you need to the main Retropuie system files also

There's no resolution related setting in EmulationStation - are you sure you haven't set-up the resolution in your desktop ?
Please post the EmulationStation log taken after starting EmulationStation with

emulationstation --debug

@abj ok

@jak75

This message is the runcommand launch menu, it's not an error message. It's appearing every time you start a game. More info here : https://retropie.org.uk/docs/Runcommand/.

@Jvdos OK well, I tried to use the following config.txt file again since that one shows on the HDMI. Nothing changed even after rebooting multiple times.

# For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan #disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces dtparam=i2c_arm=on #dtparam=i2s=on dtparam=spi=on enable_uart=1 # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on dtoverlay=waveshare35a #dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900 hdmi_force_hotplug=1 #max_usb_current=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 640 480 60 6 0 0 0 hdmi_drive=2 [pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] #dtoverlay=vc4-fkms-v3d overscan_scale=1

So, any changes I make to config file have no effect now. Even after loading the original config.txt before adding any drivers etc. I am probably going to restart with a fresh install, and then alter the config file.

Thanks for digging it up.

The cursor is not notified about the changes in the last played collection list view (and the LR/LB paging has a different logic than the -10/+10 list items paging), that is why the cursor and the list view divert.

Patch to fix it: https://github.com/RetroPie/EmulationStation/pull/874

If you're using the standalone emulator and not the libretro core, then it's normal. The hotkey enable button/shortcuts are generally available only for libretro cores (emulators names lr-<something>).

@thewillrussell What exactly did you not understand ? In order to provide better support, we need to know some information related to how your system is set-up, which the https://retropie.org.uk/forum/topic/3/read-this-first details.
Are you not able to provide this info or you don't understand how to get the info requested ?

No, use a PS1 emulator.

Yes, it's a typo on the documentation page - thanks for the heads up. I fixed it, the change should be published soon.

@ExarKunIv It did not work for my Xbox S wireless controller, but it did work for my Dualsense. Once that was connected, all I had to do was start the binding process by pressing enter on the keyboard while selecting the first binding and then going down the binds with my Dualsense. Thanks!

@mitu I have. On the Pi, when I plug into the second HDMI port I don't get any display at all. And I've tried all three HDMI ports on the back of the TV as well.

ok, it's got to be the Pi. I just found a backup from 3 years ago. Did the same thing. Audio played fine for the first few clicks, then went out. I'm going to contact them to see if they concur, but since everything software-wise seems correct, that's got to be it.

@mitu awesome.

The new ones will be Xbox controllers, whereas the original 2 are just arcade sticks and separate buttons going through a USB encoder.