@Dinierto Did you get an answer on this? I have the same problem.

I can't even get sound/cdtracks to get picked up by Darkplaces. Which folder did you put that within - mine is sitting in /home/pi/RetroPie/roms/ports/quake/id1/sound/cdtracks - but I've tried /home/pi/RetroPie/roms/ports/quake/id1/id1/sound/cdtracks and /home/pi/RetroPie/roms/ports/quake/sound/cdtracks also

Did you have to do anything else for that to work?

Edit: I've got this working now, I have .ogg files and .MP3 files in home/pi/RetroPie/roms/ports/quake/id1/sound/cdtracks and they are picked up in Darkplaces.

I've also got lr-tyrquake working, the same files in home/pi/RetroPie/roms/ports/quake/id1/music

I don't know if the original .ogg files I had were bad, or if having the .MP3s in there makes a difference, but it is working whatever the problem was.

@mitu That did the trick, thanks!

Welcome to this forum.

@psant said in 4.6 not recognising psx roms or .pbp's:

What are the steps to set the 'Parse Metadata only' in EmulationStation to 'off' on my pie4.

Press Start on your controller and choose Other Settings. There you are.

edit: typo

What model of SNES USB controller ?
If you use jstest to test your controller, are the D-Pad left/right inputs recognized separately, or they overlap other buttons ?

You can re-configure the autostart options from the RetroPie-Setup - https://retropie.org.uk/docs/FAQ/#how-do-i-boot-to-the-desktop-or-kodi.

@JimJames I think I have the same issue, could you remember the video or how to fix that? it would be a big help.
Thanks!

@DavidDraper the setting you're looking for is aspect ratio, and you want it set to the default of 'core provided'. it's in the video settings.

however, i would caution against setting things via retroarch unless you know exactly what you're doing.

@mitu
Ah, got it. I thought my method might be out of date but I'm new to digging this deep, and it's a frustrating but fun learning process. Thank you a ton for the help, I'll check that out once I get the chance today.

@mitu Oh Sorry!!
My english is very bad jaja.

So.. im gonna to try the scripts and when i have a switch im gonna try it connecting it to ha 5V and ground GPIO.

Thank you so much!

@gizmo90 said in Retroarch Integer Scale setting not saving:

Any idea why the cfg file is being ignored?

If you're running a custom image, then we don't know how it was modified or configured from a stock RetroPie image.

This is the results of vcgencmd get_config int.
enable_dpi_lcd and display_default_lcd are set to 1.

arm_freq=1500 audio_pwm_mode=514 config_hdmi_boost=5 core_freq=500 core_freq_min=200 disable_audio_dither=1 disable_commandline_tags=2 disable_l2cache=1 display_default_lcd=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dpi_group=2 dpi_mode=87 enable_dpi_lcd=1 enable_gic=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=500 gpu_freq_min=250 init_uart_clock=0x2dc6c00 mask_gpu_interrupt0=1024 mask_gpu_interrupt1=0x10000 max_framebuffers=2 over_voltage_avs=-23750 overscan_scale=1 pause_burst_frames=1 program_serial_random=1 total_mem=4096 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_ignore_edid_audio:0=1 hdmi_pixel_freq_limit:0=0x11e1a300 hdmi_pixel_freq_limit:1=0x11e1a300

Got it, thank you!!!
:-)

@atablettal said in how to scrape my games in 2020:

Hi I'm using the built in scarper and it's connected to the internet

It's scraper, not scarper.
You haven't added any info about your system - older version of EmulationStation might have problem scraping because the source of the scraping (online sites) have changes the way they work. With any recent version of EmulationStation, that would not be a problem.

The naming depends on the device-tree settings, doesn't affect the actual capability of the GPU. Running the same command on a recent Raspbian OS yields

Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu

RetroPie doesn't support Manjaro OS on the Pi, btw.

@w0nderw0rm You can map the dpad to the left joystick in retroarch options. Also if you use LR-MAME2003, there is an option in that emulator to map the face buttons to the right joystick for games like Smash TV and Total carnage. I think it's on by defualt.

@mitu Just did final test. It all worked out perfectly. Cache has been moved to the external drive using the path to retropie-mount. The only thing that was weird was after nano-ing into the config.ini, I got the same error message, even after the MicroSD was cleared of the cache. It was just a black screen with the error message at the bottom. However, after hitting ctrl + r to give a command to read a file, I just typed in config.ini into the prompt, and then the file decided to open and let me edit it. Aside from small bump, everything worked out perfectly.

@ScoobyAA Happy things are working well for you and that I helped.