@vindicator

These links should help:
http://openmsx.org/manual/user.html#diskimages
http://openmsx.org/manual/user.html#tape

Just make sure you're running authentic MSX1/2 BIOS files, as the included BIOS doesn't support disks and tapes.

Buzz once again you were right. Changed the bloody Kingston with a SanDisk and workd like a charm

SOLVED

@k0st1x delete what is in your /opt/retropie/configs/all/retroarch-joypads/ and configure the joysticks in emulationstation again.

For the emu specific mappings it's better to use this method:
https://github.com/RetroPie/RetroPie-Setup/wiki/RetroArch-Configuration#core-input-remapping

this might be relevent: https://github.com/tasanakorn/rpi-fbcp/issues/5

(rpi 0 is rpi 1 to all intents and purposes)

okay, so i went inside and removed the USB hub and tried running straight to the adapter to the zero and still get the same issue. Controller vibrates and no lights.

if you use the arcade folder i think it's either in /home/pi/RetroPie/roms/arcade/mame2003/cfg/ or /home/pi/RetroPie/roms/arcade/mame2003/nvram/ - probably the former if it was set via the MAME ui.

but, to avoid doubt i would back up everything in /home/pi/RetroPie/roms/arcade/mame2003/, as you probably want the stuff in the other folders anyway.

@herb_fargus I am aware, thanks. Also autostart.

@BuZz thank you

@meleu said in Remapping hotkeys from keyboard to joypad? HELP!:

@superdan you say if it's good. Are your hotkeys working fine?

@adafruitfly your problem deserve its own thread. Please, start a new one.

This forum won't allow me to submit a new topic for some reason. I keep getting error messages. I can only reply to existing posts.

@jrmymllr

That is strange. You can always try attaching the WiFi adapter to another machine to see if you get the same level of instability. You can also check the adapter against this list to see if there are any known issues.

@g0nz0uk some bluetooth controllers has different numbers than those returned by jstest. But it still is the best tool I know to get the numbers...

Ok, thanks to all for your clarifications.
I was able to install rom with proper file extension as described there: https://github.com/RetroPie/RetroPie-setup/wiki/Supported-Systems
It works with what I tried.

Samuel

@g0nz0uk yes. You will need to expand it from raspi-config.

@derebo I just created the new torrent file:

http://s000.tinyupload.com/index.php?file_id=16475976792562576515

I think I'm going to make a separate topic for this and will update the page with every new release. If there is something that I really hate it's slow internet lol

EDIT: I decided to start an official topic with the Torrent download;

https://retropie.org.uk/forum/topic/4400/torrent-download-retropie

From now on please post on that page if you have any questions. If there is a new version I will create the torrent and upload it here on this board.

@Flesy_ Do you try it? Can confirm that it works?

Alright, I've decided to buy a Pi3 Kit and go with it, since it comes with all those built in functionalities. Thanks for the fast replies!

After upgrading to the new version of vice I have got a similar problem.
It seems the joystick mapping file does not load on startup anymore.
I have to go to the menu and load the joystick mapping manually in order to get my joystick mapping working again.

Does anybody know how to auto-load the joystick mapping on startup? With the prior verion of vice I had not this problem...

OK I will check that out.
It seems if I assign a direction, it would assign that... and not get it backwards.
WIll report back after I do that