Yes, the second one you linked. you would connect your power in to the microusb port. The full USB port would go to the PI's micro port. Blue/White would go to GPIO. Power switch would be soldered to switch +/- connections... If you could fashion something to use the reset switch, you could connect that to the reset connections. You can also connect the front led to the LED/Gnd ports as well... (GND is shared between reset and led)

@Floob pi3 using lr-fceumm.
No overclock.

Not yet - I will update https://github.com/RetroPie/RetroPie-Setup/issues/1696 when it is done.

Made some progress by changing the retroarch config to use sdl2 instead of udev. However It feels a little bit flaky. Now I need to try and get the second controller connected.

https://github.com/RetroPie/RetroPie-Setup/issues/1077

Another couple of ssh options, assuming your Pi is networked:

From an android device, use JuiceSsh. This is an excellent remote shell tool, and free
From Windows, use PuTTY.

Awesome thanks so much for the quick reply!! Going to try this now :) Appreciate the assistance!

@superdan said in Keyboard TAB key not working in MAME/Retroepie:

Thanks for your replies,
The situation at the moment:
lr-imame4all -> TAB not working if games are in the "arcade" folder.

tab doesn't work in lr-imame4all. if you want to use tab, use mame4all-pi, also available in the arcade folder.

Thanks for the reply suprjami. Unfortunately I couldn't get it to work looking at those two links. My knowledge of linux just isn't good enough.

If only there was a way to use a conditional statement within asound.conf that checks to see if the USB headset is plugged in before changing the default output to it.

@senthudas
https://github.com/RetroPie/RetroPie-Setup/wiki/RetroArch-Configuration#core-input-remapping

While trying to be helpful, the above posts were not specific enough.

Using hints from the config files here:
/opt/retropie/configs/n64/InputAutoCfg.ini
/opt/retropie/configs/all/retroarch-joypads/WishTechnologiesAdaptoid.cfg

And the official documentation from both mupen64 and retroarch, I managed to create a configuration specific to the N64 controller with adaptoid USB<->N64.

(EDIT: The below confusion caused by one simple issue. One cannot restart emulation station to reload the /opt/retropie/configs/all/retroarch-joypads/, one has to restart the entire RPi!!! What a bug D:)
There is some confusion for me that I'm trying to work out. I set the save/load state, but somehow load state on button "12" and in the mupen config it's "DPad L = button(12)", yet start+C-left will load state... Weird stuff all around.

In WishTechnologiesAdaptoid.cfg:
#Start button
input_start_btn = "8"
#Start is now the "hotkey"
input_enable_hotkey_btn = "8"
#Left shoulder "L"
input_l2_btn = "6"
#Start (hotkey) + Left-Shoulder will exit the emulator
input_exit_emulator_btn = "6"

Full adaptoid config in /opt/retropie/configs/n64/InputAutoCfg.ini
I was using this to reference what button is what for the above changes. By default from the previously linked config, it had some issues, such as A button was C-down, C-down didn't do anything.

; Wish Technologies Adaptoid_START
[Wish Technologies Adaptoid]
plugged = True
plugin = 2
mouse = False
AnalogDeadzone = 4096,4096
AnalogPeak = 32768,32768
Mempak switch =
Rumblepak switch =
C Button D = button(1)
C Button L = button(4)
Z Trig = button(9)
Start = button(8)
Y Axis = axis(1-,1+)
DPad U = button(10)
C Button U = button(5)
B Button = button(3)
A Button = button(0)
DPad D = button(11)
X Axis = axis(0-,0+)
R Trig = button(7)
DPad R = button(13)
DPad L = button(12)
C Button R = button(2)
L Trig = button(6)
; Wish Technologies Adaptoid_END

Side note, I wanted to make sure keyboard and other controllers are disabled. I have some USB SNES style controllers, but I don't want them working with the N64 emulator.

In /opt/retropie/configs/n64/InputAutoCfg.ini
Find the "plugged" option for keyboard and other controllers you don't want to run in the N64 emulator, and change "plugged" from "True" to "False"
; Keyboard_START
[Keyboard]
plugged = False

#My case has these other USB controllers configured:
; 2Axes 11Keys Game Pad_START
[2Axes 11Keys Game Pad]
plugged = False

@meleu Yep, changed it, but it still wants to use controller #1 to control Luigi

@edmaul69 also, i forgot to tell you to go down to joystick mappings and set up both players controllers.

If youve just started with the image, I'd stop the update and write it again - Kodi is there (the lists arent alphabetical so scan through the full list) so no need to update.

If you do want to update (there is rarely a need), use the binary update, not the update from source option which it sounds like you may have done.

@vbs makes sense that you had slowdown now you mention the CRT filters. The filters adding approx 20% load so combined with resid thats going to cause slowdown. Testing the Edge of Disgrace demo with both switched on is causing stuttering/frame drop to 40fps

@Floob said in Sega Monoco GP:

THanks for that as well Floob :-)

@joaovlg try to follow these steps I'm talking here:

https://retropie.org.uk/forum/topic/2719/keyboard-stopped-working-after-i-played-around-in-the-controller-config-in-rtgui/2

@herb_fargus

Upon reading more of these links, I think the big problem for me is I have a Pi Zero, and if I'm not mistaken, installing add'l emulators really requires an Internet connection. This is obviously a problem, unless maybe if I had a USB hub.

I tried following the instructions, found the emulator on the list, but it simply complains it can't find it. So for now at least, I'm taking the path of least resistance and getting 3.8.1. If it does the job, I'll keep using it. If there's some way to install these add'l emulators thru a USB flash drive, please let me know. There seems to be a good bit of confusion around this.