@dankcushions said in Two shader directories in 4.1?:

@batesman said in Two shader directories in 4.1?:

@dankcushions So is it possible to be able to cycle through the shaders without setting one as a default?

i think so. by default you need to hold your hotkey (select on your control pad) and press n or m on a keyboard, i believe.

You got it. I had to hold select on the control pad, then press m, n to cycle. Based on the way the hotkeys were defined in the retroarch.cfg file I thought I only needed to press m or n.

Thanks!

@curt7088 good to know that everything is working now :)

@alightgoesout , did you mapped both inputs through Emulation Station?
Go the the Retropie Main Menu and press start on controller 1. Go to configure input, press A on controller 1. Then, say "Yes" pressing A again. Now, press and hold any key on the controller2 and follow instructions. I have solved the same issue before, doing this.

I hope it helps.

Filipe

0_1484621263413_IMG_20170116_213046.jpg

It works perfect! This is exactly what I was looking for! Thanks so much!

@nobiscis said in RetroPie Resolution/Input lag help:

@columboscoat
Here are the results
state 0x12000a [HDMI CEA (17) RGB lim 4:3], 720x576 @ 50.00Hz, progressive

Tried changing to a 60hz resolution?

@KillerQ yeah, I get what you are saying. I actually use mine but I also enjoy the tinkering and set-up just as much, if not more!

Actually looking at the Mausberry, it says it uses pins 23 and 24. Im no genius with schematics, but those pins above look to be dead considering they are X'ed out. Worth looking into, but even still you better be comfortable with soldering because the vga666 doesn't have exposed pins so you'll probably have to solder the mausberry wires to the pin bases on top of the vga hat

@mediamogul

I obtained another ROM. I realized that retroachievements showed "bad rom pile" on their website when I loaded the old file.

@b00stnv8 Thanks for your answer. I'm a bit confused about your ON/OFF LED. On which pins did you solder your LED ? Same for your Shutdown scripted button ? I found some interesting answers too here for the GPIO power state led and here for the safe shutdown switch. Tell me what do you think about it.

Thanks Gerald. This worked for me! I'm assuming I'll have to do this for every additional controller I have connected, but it's not a big deal. I wonder why the main Configure Input on the emulation station doesn't work for the individual roms.

Press start and choose Configure Input - try to map buttons once again You can change exit hotkey button but only for two buttons - one button for activate hotkey and second for exit lr-xxx is a libretro so it's all well connected through RetroArch so you can press hotkey set for RetroArch menu and configure your buttons. If you don't use libretro then you have to set it manually (probably by editing some text file) You can do it from pc via SSH but you have to know basics of linux bash. It would be easier to do just by RetroArch and trying to stick to libretro (lr-xxx) emulators. Just use RetroArch menu during libretro emulator working.

@Melvin.FoX i will. And if i still have issues i will post them.