@pimpernelle1969 said in Retropie Arcade (MAME/fba) custom GAME ROM Input Device:

Is it easier with version 4.5?

it should be the same. You can try on your existing image - opening the RGUI for the game you'd like to change the inputs and change the controls until you're ok, then save a game override.

Where can I get a reputable installation file? or can I do that via the retropy menu? I'm a bit afraid that nothing will work after that.

The only image we support is the one that you can download from retropie.org.uk/download.

Nice job man! Definitely an upgrade from the cardboard box! =D

Very clean and I'd digging the shallow depth.

@pm4698 said in Create custom arcade console:

In case i want to seal this arcade box, does raspberry support so many controller inputs? (2 USB-joystick-button controllers, 2 normal USB controllers, 2 light gun controllers and 2 wheel controllers?)

Not sure on the light gun part but I would assume so, I use the ipac (mini) as well with sanwa joysticks and gold leaf buttons from ultimarc. I've used the inexpensive stuff on amazon also but nothing compares to the ultimarc IMO. The only thing with the sanwa's is going from 8way to 4way switching for games like Donkey Kong as the switching is under the panel. I tried using other joysticks that switch at the top and just didn't like them (mag-stik being one of them). I did get the sanwa working with a servo (servo-stik) for auto switching however my control panel did not have room to fit the servo... I used a toggle switch to move the restrictor plate. You can also set the rom bootup to change to the correct setting but I opted for a manual switch.

I use the arcade sticks for mame games, and usb wired xbox360 like controllers for nes/genesis etc. Some nes/genesis games I use the arcade sticks as well, Works great either way. I don't remember if I ever got genesis 4 player games working with arcade sticks and usb controllers together, IIRC I had to use 4 usb controllers was something with the multi-tap in genesis but I only have 1 friend so it's not a problem normally lol.

You will need a powered usb hub as you wont have enough ports for everything.

MDF is what I used for a small 2p bartop, going to do a 4 player pedestal next using MDF again.

@BuZz Thank you sir. That helps a lot.

@mitu of course
Sorry

@TheRealSmilebit Ok, and just one more question, what holesaw size did you use for the trackball? (2 1/8 inch?)

Thanks!

@thelostsoul Ach guck mal, ein Landsmann 😊
Ich komme aus Münster/NRW by the way.

50x gescrapt? 😱
Ich scrape gar nicht sondern mache mir echt die Mühe für jedes Spiel ein eigenes tolles Artwork zu suchen.
Hat zwar lange gedauert aber dafür ist mein Setup natürlich ziemlich schön anzuschauen und ziemlich einzigartig.
Könntest du nicht einfach die gamelist.xml backupen, wenn alles so ist wie du es haben willst?
Das zu kopieren geht doch mit Sicherheit schneller.

@topic: Im ersten Schritt habe ich ein paar FBA-ROMS in den NeoGeo Ordner gehauen und getestet.
Laeuft soweit, wenn auch Cyvern zu anspruchsvoll ist (ruckelt zu stark) und BeeStorm den Dienst versagt, probiere ich nachher noch mit dem Japan Set.
Aber alles in allem super, ich mache an der Stelle erst einmal weiter und schaue was geht 😊

Kommt man bei FBA eigentlich auch irgendwie an die Dip-Switches der jeweiligen Spiele?

Gruß und einen entspannten Samstag

@clyde said in Arcade on wheels..:

Great idea and build. In addition, you could cover it with a one-sided mirror so it looks like a hall mirror when it's turned off. :)

That would look very nice, but I don't know if I can deal with all the glare it will produce.

Thanks @clyde I am definitely going to add arrows to indicate direction on this box. This one will likely be disassembled with most components going into my full cabinet build.

@mattyl42 great! not hard at all - the noshaders.glslp file is one line saying shaders = "0" so no shader is loaded :) i didn't think it would work!

that's a really cool setup - when you're done make sure you post photos in the projects and themes forum :)

Yeah thanks, can you do that off any controller inputs or do I need to get a key board?

@sadtraxx What they meant was that you don't unzip the roms themselves, maybe there was some miscommunication.

The files you're expected to have in the folder must match these:

https://docs.google.com/spreadsheets/u/1/d/1GaqIIoiWbzKHwZ52S2xCSDQXILo81Ls1mHK6czKGAtM/edit?usp=sharing

I have two Arcade Boards that dont work with my Pi 2+3: the MadCatz StreetFighter Tornament-Board (PS3) and the NeoGeo2+ Joyboard, also for PS3. Besides of them i agree: all USB Devices apart of these two seem to work on the fly. Im using MortalKombat-Tournament Sticks by the way and love them

@LazyLizard This seems to be a great bash guide with cool tips and tricks:
http://mywiki.wooledge.org/BashGuide

And if you have a specific question about bash, this is a really good resource to look at (even before searching in google):
http://mywiki.wooledge.org/BashFAQ

You need to read this article:

https://github.com/retropie/retropie-setup/wiki/FinalBurn-Alpha

I can suggest you to use lr-fbalpha emulator.

read the forum rules and don't post ROM links or where to get them