@mattrixk lol yeah man I'm having fun with it all, made one theme already but working on anither now just couldn't get rid of that text so I could add my own.

I will have to upload my first theme to share soon.
Thanks again.

@Brutilus Did you install any driver for your controllers ?
Update your RetroPie installation (if you haven't done already) and reset your controller configuration, then try to install the ps3driver and pair your PS3 controllers. Make sure they work, then report back if they haven't.
You can debug your input configuratio/detection by looking at the Emulationstation's log file - in ~/.emulationstation/es_log.txt.

@pengu1n said in Does Retropie 4.4 Run on the CM3+ Lite?:

I ran into a login prompt at the console on reboot though...which was strange

That happens when systemd is updated - a known Raspbian behavior - https://retropie.org.uk/docs/FAQ/#why-emulationstation-doesnt-start-automatically-after-an-update.

@lmjiang1 Hi. I've been trying to get my M30 pad working with my Pi running Retropie, and it connects ok via Bluetooth, but my problem is that the controller won't recognise the R or C buttons when configuring it in Emulation Station. Do all your buttons work ok?

If I were to hazard a guess, I would say that changing over to a USB boot means that your USB ports are staying powered on when your system isn't running. You should probably just unplug the power source after shutdown.

sory here is the full link to the setup intructions for the amp: https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/raspberry-pi-usage

@FlashFlood2864 That's good news. Your welcome. If you get any problems with your wifi connection in the near future, you can try changing the wifi channel in your Router's administration.

Being on a wifi channel chosen by your Router is not always feasible and could decrease the wifi's signal if there are too many wifi network's using the same wifi channel. The Router might have a built-in wifi channel tester. :-)

@TimeDoctor said in Control works inside ES, but not in-game:

None of this would be a problem if the ES input configuration were passed to retroarch properly.

My suspicion is that you've reset the RetroArch configuration and it doesn't look for the gamepad auto-configuration file in the folder where Emulationstation saves it (/opt/retropie/configs/all/retroarch-joypads).

It might be worthwhile to uninstall and reinstall the Xpad driver. After my last update, I had to do that inorder to get my 8Bitdo controllers to fully function again.

I know it is an old topic, but I really like Space Oddity theme and I cant disable OMXplayer, so I changed some values at the theme file and this was the result:
WhatsApp Image 2019-05-20 at 18.12.25.jpeg

I changed pos and origin values, and replaced maxSize for size. You can see the file and change it by yourself, or just download and overwrite it

Changes:
Screenshot_1.png

Link:
https://github.com/Ephastus/space-oddity-theme.xml-OMX-Fix-

Sorry, this isn’t my first language, feel free to correct me.

@Lolonois Thank you so much
this was the kind of information i was looking for (",)

i have seen this info a little later than i had hoped, but i just ordered myself one of these
https://www.ebay.co.uk/itm/F7A5-Output-5V-12V-24V-Switching-Power-Supply-Adapter-For-Arcade-Game/303072398956?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D99aac9499dfb4225b56ee8f92564984a%26pid%3D100675%26rk%3D2%26rkt%3D15%26sd%3D132922393594%26itm%3D303072398956&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3Ae5a0cda2-3c28-11e9-b0ec-74dbd180e49a|parentrq%3A3984c39f1690ab67099da24cfffd2b27|iid%3A1

As far as monitor heat extraction, no it wasn't something i had considered but now you've mentioned it, it's something i'll need to look into, so again thank you for your help and guidance i really appreciate you taking the time.

@ironj679 Sorry we couldn't fixed your original problem - but I'm glad you managed to find a solution. I hope the upgrade to 4.4 was smooth and you managed to keep all you settings.

You posted the same topic 4 days ago - please don't open multiple topics for the same problem.

@keksninja

Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..)
Power Supply used: (If using a Pi)
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest):
Built From: (Pre made SD Image on RetroPie website, Berryboot, or on top of existing OS etc.. - please provide the filename of any image used)
USB Devices connected:
Controller used:
Error messages received:
Log found in /dev/shm/runcommand.log (if relevant):
Guide used: (Mention if you followed a guide)
File: (File with issue - with FULL path)
Emulator: (Name of emulator - if applicable)
Attachment of config files: (PLEASE USE PASTEBIN.COM FOR LARGE LOGS)
How to replicate the problem:

Please copy the above and fill in the info. Otherwise we have no idea how to start helping you.

@mitu Would one land in another shell, then? If so, a quick emulationstation should restart ES, which may be a little less invasive than to restart the whole system with REISUB. (Just hypothesizing.)

@OutRun said in [HELP MAME ] Can MAME 0.206 run older / previous mame version game's ?:

Did someone try to insert Hacks in MAME emulators and play MAME Games with hacks?

Yes - https://retropie.org.uk/docs/lr-mame2003/#cheats

And where you find MAME games without viruses and other stuff ?

Asking for ROMs is not part of this forum - http://retropie.org.uk/forum/topic/2/forum-rules.

@Azuke

As far as I know Amiga games do not come in .exe form.

I has installed multiple OS's initially, but then realized they partitioned out equal amounts of my SD card equally. So I reformatted my SD card and did again. Why do it with PINN if I'm only installing 1 OS? I wasn't sure if I was going to install 1 or 2 OS going in.

@mitu yeah i will . sorry for my bad english my english is not the best

i didnt buy one yet but i will first i will complete rom/games i think i need a 256GB SD Card -.-