@mitu yes I pay $5 per month.

I will validate with checksums to see if anything stands out. I will give some examples of roms later on.

@chris_db said in Retropie + Raspberry PI 3A+ = KO:

Can you point me to a working image for the 3A+?

There isn't other image - if the weekly snapshot images are not working for you, then try the official Raspbian Lite image and install RetroPie manually - https://retropie.org.uk/docs/Manual-Installation/. Does the official Raspbian image works on your 3A+ ?

https://retropie.org.uk/forum/topic/22564/favorites-in-kiosk-mode-are-not-working

has the context.

@Lugzyboy82 said in Problems getting pi 3+ to load front end:

Please keep in mind that it onlu successfully scraped 50 out of 800 snes titles.

In this case please open a topic with details if you want to find out why. Include the information asked in https://retropie.org.uk/forum/topic/3/read-this-first and give a few example ROMs that are not successfully scraped.

@Efriim well thec64 mini doesnt even have a boot folder or 99.9% of linux in it. They made that thing absolutely bare bones as possible. I did discover that the ppsspp emulator on the pi uses a gamecontrollerdb.txt. I added theMayflash adapter to the gamescontrollerdb.txt and then tested in the emulator and the hats work fine. So i am not sure what the c64 mini’s problem is. I do however have a raphnet chip for wii classic controllers that i can solder up the wires to tomorrow to see if that one is working.

@quicksilver
'lr-mupen64plus-next'
Think i got it work not sure maybe it will got stuck again ..
update all from source think it helped .
and played again for half an hour nothing happend ...

@Felixoid said in Cannot configure 8BitDo M30 controller shoulder buttons:

@psyke83
Hello. I've built a binary from the master, but the shoulders still don't work on the M30 pad. Could you tell if they already should work?

It should work on the latest dev branch, yes. Is your controller definitely using axes 2 & 5 for triggers (considering differences in firmware/pairing mode)?

Note that the axis filtering is done only when defining the trigger buttons, so if you're doing non-standard mapping to buttons other than the triggers, it won't work.

@mitu so far I've changed every setting I can find to fix this but it's either fully stretched or displays in the far right bottom corner with most of the screen cut off including the retroarch menu
I gave up editing config files manually and just adjusted the screen from within retroarch gui, it ended up being an odd size resolution tho

@simongeoghegan
As long as you take a backup of the .srm you needn't worry about anything.
The network share is the easiest and it only shares user data folders for retropie like: roms bios and configs.

The folder will be displayed like a windows directory in explorer, the local network doesn't need any configuration, it could be either through a router or directly connected through the ethernet.

Okay,

I think I found the solution. There were a couple of roms without "[!]" in the name. Because I was trying anything I could think of, I deleted those files and now everything is fine. Emulation shows every N64 rom now.
Sorry for asking your help. Thank you for thinking with me for finding a solution.

Best regard to all of you!

Yes you can resize your sd card img but you need a bit of linux knowledge (gparted and truncate) to do it and a linux machine or VM.

Some pretty good instructions on here
http://www.aoakley.com/articles/2015-10-09-resizing-sd-images.php

@guruguys

... from what i can read on this trimode pcb, it already has a (atleast one) gamepad mode using the switch on the back?

its hard to know for me as the link to the manual dosnt work, but if thats the case, then you should be able to just switch it to "gamepad" mode and remove Xarcade2Jstick.

I updated https://retropie.org.uk/forum/topic/19741/goodbye-fbalpha-welcome-fbneo with informations that could be useful

After hearing the replies I think I will just power it on with the front button.
Thanks for the replies!

@mitu Just for heads up there is a switch --no-osd ;)
I should read 1st thread ... but you may wrote wrong command it's --no-osd without any blanks because the command works for me and I get rid off green messages.

Normally you should add db9_gpio_rpi (no map parameter) to /etc/modules, so the module is automatically loaded. The parameters should go in /etc/modprobe.d/db9.conf as

options db9_gpio_rpi map=1

@mitu said in Pi Zero W Issues - Won't Boot Without a Keyboard??:

@WishItWas1984 said in Pi Zero W Issues - Won't Boot Without a Keyboard??:

So while the update didn't cause an endless loop of file system checking, I now have this.

It's because systemd updates break auto-login - see https://retropie.org.uk/docs/FAQ/#why-emulationstation-doesnt-start-automatically-after-an-update for an explanation and solution.

Thanks for testing this, it means the original problem is solved by updating the Raspbian packages.

Thanks! That did the trick.

Thanks @mitu @Efriim Apologies not to answer before.
Turned off OMX and everything same with arcade game videos (some of them). Tried to convert with handbrake w/o any scrift (very easy to do...and tried some different configurations) but no luck. The only option was to download .mp4 from YouTube...and works and I dont know why.

Its rare because the video was the same from the beginning I was made couple months ago and did work perfect, so its not a Skraper/XML problem...I think

EmulationStaion is on the last build 2.8.3RP

Anyway, many very thanks.

@quicksilver
thanks a lot <3 got it