@edmaul69
After doing a shitload of searching I found this: https://retropie.org.uk/forum/topic/8228/how-to-install-force-feedback-support-for-pantherlord-greenasia-usb-ps1-2-dualshock-adapters

I will try it when I get home :)

@Allanbuzzy You can't speak of a installation here! The usb helper script only copies the roms from the sd card to the usb stick and keeps them on both! It won't delete anything

If you plug in the usb and start up retropie it mounts the usb device to the /home/pi/RetroPie folder, so everything on the sd card is "hided"!

try enable the ssh server on the pizero

====
sudo raspi-config

Scroll down to interfacing options then “ssh” option

Hit the Enter and then select “Enable”

@dankcushions Thanks :)

@Welc-ohm Je parle fracis seulment un peti pu. Pas problem, mon francis et trop mal ossi!

it seems the problem was created because there were 2 gamelist.xml files.

one in the normal gamelist folders, and one was in the rom folder. no idea how one was created in the rom folder. deleted it and stuff seems out now after rescraping using the emulationstation built in scraper.

selph's has always worked with mame i think. i've always used it.

the screenshot is already in the command line. if you type

sudo nano /etc/asound.conf <enter>

...you can edit it, and maybe fix it.

I have to go now... sorry! I wish you luck!

@herb_fargus Note I use ubuntu linux, so I would like the program to work with that.

@edmaul69 ok i will try that and i tell you if it's work thanks for your times

You can always download the games already in pbp format. Saved me a bunch of time that way. I found just about every american release already premade.

@AlexMurphy

Terrible stuff. I actually have a copy of the shooting script that has the Wookie parts translated on the page. It doesn't improve things. Although 'The Star Wars Holiday Special' certainly holds the crown as the absolute worst, retro-gamers can seek out their own personal nightmare before Christmas with the ill-conceived 'Christmas in Pac-Land'. Theses shows are not without merit however. They're a great stand-in for ipecac if you can't make it out to your local pharmacy and you've run out of eggnog.

@chrissphinx Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

Make sure you are using an official image, or have done a manual install yourself. We will not support 3rd party images.

@Trailjacker

It's a little bit of both. These are my overclock settings. ymmv

arm_freq=1300
gpu_freq=500
sdram_freq=500
over_voltage=6
v3d_freq=525

If you put the section in, as in my post in the other thread, and load Rice HiRes, it does work, but as soon as you load Glide it seems to remove the section again.

@sadkiwi Just some tips, if your question involves something that isn't working, explain it as accuratly as you can, and explain how it is connected/related to the pi. Also sometimes add the code you are using for some projects.

Did you get a change to try this? Was it successful? I did the same thing haha. Have yet to try this solution.