@sebalberico said in How deactivate the option to shut down with F12 ?!:

I do the changes (save) restart the system to see if something has changed..and nope...all gone.

That's strange and can't find an explanation for this - if the information added by scraper is the same thing, so one is saved, the other should also be saved.

@mitu said in Unable to install gamecondriver-package:

db9_gpio_rpi/releases/tag/v1.3.

Thx, mitu. The install worked fine:

pi@retropie:~/db9_gpio_rpi $ sudo apt install -f ./db9-gpio-rpi-dkms_1.3_all.deb ... Building initial module for 5.4.72-v7l+ Done. db9_gpio_rpi.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.4.72-v7l+/updates/dkms/ depmod..... DKMS: install completed. Module build for kernel 5.4.72-v8+ was skipped since the kernel headers for this kernel does not seem to be installed.

Thx, skidiver

I am having an issue I have seen mentioned here many times without much of a clear answer,

Where ? I haven't seen this mentioned so frequently here. One thing that beginners are stumbling is the fact that only the P1 controller is able to run the hotkey enabled actions, but situations like P2 not working at all, that's not something that's reported.

To start, I configure both controllers in the Emulationstation UI. I have also configured both controllers in RetroArch UI and saved the profiles. I have done that step both from the RetroPie menu and on the fly from the game with a Rom loaded.

There's no need to re-configure the controllers in RetroArch if they've been configured in EmulationStation, the latter will take care of properly configuring the controllers for RetroArch.

Once the game starts however, I have no luck getting inputs from the controller on Port 2

Is this a 2 players game and you've chosen to start with 2 players ? Which game it is ? Does this happen for other systems also (PS1/NES/etc) ? Did you change the 'Device type' in the 2nd Port to something else from the RetroArch's ?

Dietpi on Orange Pi zero 2w.

Thanks, I'll try!

For my N30, SN30 and my P30 mod kit. I'll update this post when tried. And I'm writing this to find the topic tomorrow evening 😉

Edit: I needed to activate the flashing status.
Followed the rest of your steps though. Did not successfully and stably connect the N64 mod kit yet.

Edit: Best ways of working to connect 8bitdo modkit Bluetooth controller with Retropie on the Orange Pi Zero 2w, so far…

Do not install blueman-manager.
Do not connect via Bluetoothctl in the terminal.

Use Retropie Bluetooth menu to connect to the controller. Assure the /var/lib/bluetooth/MACADDRESS/ does not contain the controller device you wish to connect. Delete the controller file, and also from the cache folder, if any issues occur.

Hope this helps any future Dietpi users.

@mitu That worked! Thank you!

Can you run the following commands and post the output here in the topic ? If xpad is not recognizing the gamepad, we can try and force the driver to load is we know the device's Vendor and Product Ids

lsusb cat /proc/bus/input/devices

Hello, I use this post as I want to use exactly same config (my pie is used as Home Asistant and collects datas).
I installed retropie using this. On Rpi5 and nvme.
https://retropie.org.uk/docs/Manual-Installation/?h=rasp#install-raspbianraspberry-pi-os
Seems to worked fine as I can launch Emulationstation after ctrl-alt-f1. But if I try to launch a game (ex SNES roms) I have a black screen and I can't quit, need to reboot.
I did something wong ? forgot somethin ? Have I to uninstall and install ES with another method ?
Thanks.

@mitu Hi, so it works with batocera v39 and above and registers as a mouse so you said its based on linux so in theory it should work on pie as well if I can get it to work would you guys implement my settings in a future build to help people like me if its not currently plug and play? if not I am not going to worry about it and just use batocera as I upgraded my cabinet to a gaming pc if you would I will start working on it once it gets here

@sugarfree ahh. Didn't know. Since I already got it. Didn't try before I posted that

Given that now the splashscreen is using vlc instead of the (Pi specific) omxplayer video player, it could be possible to make it work with other boards, but right now it's not supported outside the Pi systems.

@mitu Wasn't sure if removing the override would break anything. Removed it today and its working fine. Thanks.

That's ok, since vlc tries a different number of display options and they're not available. Can you run

dpkg -l | grep vlc

and post the output ?

pi@retropie:~ $ dpkg -l | grep vlc
ii libvlc-bin:armhf 3.0.17.4-0+deb10u2+rpt1 armhf tools for VLC's base library
ii libvlc-dev:armhf 3.0.17.4-0+deb10u2+rpt1 armhf development files for libvlc
ii libvlc5:armhf 3.0.17.4-0+deb10u2+rpt1 armhf multimedia player and streamer library
ii libvlccore-dev:armhf 3.0.17.4-0+deb10u2+rpt1 armhf development files for libvlccore
ii libvlccore9:armhf 3.0.17.4-0+deb10u2+rpt1 armhf base library for VLC and its modules
ii vlc 3.0.17.4-0+deb10u2+rpt1 armhf multimedia player and streamer
ii vlc-bin 3.0.17.4-0+deb10u2+rpt1 armhf binaries from VLC
ii vlc-data 3.0.17.4-0+deb10u2+rpt1 all common data for VLC
ii vlc-plugin-base:armhf 3.0.17.4-0+deb10u2+rpt1 armhf multimedia player and streamer (base plugins)
ii vlc-plugin-qt:armhf 3.0.17.4-0+deb10u2+rpt1 armhf multimedia player and streamer (Qt plugin)
ii vlc-plugin-video-output:armhf 3.0.17.4-0+deb10u2+rpt1 armhf multimedia player and streamer (video output plugins)

@sugarfree thanks! Good to know there is a way to do this from the terminal window. I ended up following the instructions from this video to reset the emulation station input configuration for the controllers.

@superdan
I suggest following the RetroPie wiki instructions on 4K resolution performance issues: https://retropie.org.uk/docs/Pi4/?h=4k#4k-video-display

@Retrodade There isn't anything in the code I can think of that would cause that but I'll keep a note in case it crops up again. Glad it's sorted! :-)

I have seen similar graphical glitches with Driver 76. I get rid of them when I run the emulator with Vulkan enabled. Maybe this fixes the issue with this game. I am using Pi5 and bookworm 64.

Solved

When I downgraded VLC to have faster video previews, it created the problem. Just re-use the script proposed by RapidEdwin08

wget https://raw.githubusercontent.com/RapidEdwin08/RetroPie-Setup/master/vlc-downgrade.sh -P ~/ chmod 755 ~/vlc-downgrade.sh ~/vlc-downgrade.sh

And select option 2 to re-install the original VLC version. Now you can re-install EmulationStation

https://retropie.org.uk/forum/topic/35717/emulationstation-video-previews-on-raspberry-pi-5/22?_=1728574374997