Check if the mapping corresponds with the one described in the docs - see the previous link I posted. If you wish to change the mapping, then you can do so by using the core input remaping menus in RetroArch.
You can also try using the standalone emulator to check whether the default mapping for it is better suited for your needs.

If it has a dongle, then it's not a Bluetooth contrller. If it's not working with a PC, then the dongle/controller may be fake or defective. Complain to the vendor and ask for a replacement/RMA.

There's a core option to force the menu on.

@mitu thanks, I'll try it!

@thewillrussell Then the samples you are using are wrong.
As for romsets, make sure the samples you are using are meant for the arcade emulator you are using.

@mitu thankfully I just figured out how to do that and had putty set up so I’m back to ES.
I’ve also learned that the Pi is still running after Kodi crashes. It just sends my tv to no signal so I thought it shut off.

Hey @mitu.

Just what I was after. jstest is exactly what I wanted. As yet I haven't done anything with evtest or sdl2-jstest, but I've taken notes and they are now in the tool box for continued retro-pie adventures.

Again. Thanks very much for your help.

Rob

@DaveWins182 said in Retropie Drive Partition Issue with Kodi:

Any idea how I could remedy this? Thanks in advance!

Don't use /dev/sdX[Number] in your /etc/fstab, add the mount point based on the partition's UUID(s) (see https://wiki.archlinux.org/title/Fstab#File_system_UUIDs). This way the order of the USB devices is not relevant and the mount points will be always correct.

Please use English as this is an Enlish speaking forum. When asking for support, please add the info requested in https://retropie.org.uk/forum/topic/3/read-this-first, as much as you can.

This is an English forum, please post your messages/topics in English..

Please also add the info requested in https://retropie.org.uk/forum/topic/3/read-this-first to your post.

@JimmyFromTheBay said in Does anything run Sex Bomb Bunny on MSX?:

@Folly Ooh, that's interesting - the old unmodified disk DOES work fine now.

Aha, so it does stick on your openmsx install, good to know.

(But it's still flush to the bottom.)

Also on my end it's a bit to the bottom, not much we can do about it but it works !

Then mark this topic as resolved and post a follow-up either here or in a separate topic if you encounter an issue with FBNeo.

@mitu Actually it turned out all I needed to do was edit ES_SYSTEMS.CFG and it all just worked. Weird, I thought I'd already tried that.

@erdoc789 said in Failure attempting Freer Manual Retropie setup pi 5:

any resources you would suggest (I know there are some here)

The Debian user manual is a good start. Running a Linux desktop for a while exclusively is also a good way to grasp how Linux works underneath.

@abj Will look thru these again, thank you

@thewillrussell
Instructions : https://retropie.org.uk/docs/RetroArch-Configuration/#core-input-remapping