@cyperghost i did do it on my own image that i built from scratch had everything set up and wanted to add openbor but like i said it spits me back to the gamelist screen dont know what to do from here cant get the games to load on my own image

Will setting mupen64plus_audio=0 in /opt/retropie/configs/all/autoconf.cfg have any negative impact on emulator performance? I noticed that after changing this setting, the overall volume for N64 games decreased as well (bringing it back in line with the other RetroPie emulators). Just wanted to make sure there wasn't a performance trade off for enable save states. Thanks for the help!

I would use FBA a lot more, but I don't like the scaling on my CRT - it doesn't look as good as Retroarch.

Fyi, the upright, single-display version is called buggyboyjr.

Thanks for that. It actually works better than the sit-down rom, it's a lot smoother.

@mediamogul Awesome, thanks for the clarification.

I got this to work..its weird...I set it at dinput, and x/y and the thing just mapped (now the stick is mapped to Y-1, X-0)

@Clyde said in [Solved] How to rename a Custom Collection?:

You both just told me the same solution in different ways. It's good to know both.

Yeah, I noticed a little later that we posted about a minute within each other. Of course he got there first, so now I owe him a Coke.

They do have a discord, you could try there. http://odroidarena.com/ link should be on the right hand side of the page.

I set my video mode, for standard mupen64plus, here.

/opt/retropie/configs/n64

Open mupen64plus.cfg, scroll down to ...

[Video-General]

Fullscreen = True
ScreenWidth = 320
ScreenHeight = 240
VerticalSync = False
AspectRatio = True

That is what I use for 240p on a CRT. On a LCD, change the screen size to whatever you want it to be. This works for all N64 games.

I don't have an LCD screen and all I could find about this is quite old (2 years and more), but maybe it will still work. At least back then, the third party tool fbcp (frame buffer copy) would copy the hardware accelerated output of fb0 to the non-accelerated fb1. See these links on how to install and run fbcp from the console or alternatively on system startup:

https://retropie.org.uk/forum/post/50202 https://github.com/notro/fbtft/wiki/Framebuffer-use (section "Framebuffer mirroring")

As a quick test confirmed, fbcp still compiles and installs on RetroPie 4.4. Without an LCD I couldn't test its functionality, though.

@mitu or other experienced users may correct me if this is outdated, please.

I didn't suppose to waste your time. ok, thanks anyway

it doing the same thing in 2003+ the strange thing is that when you go to the service menu it all reads as working right

@joshuaquinn

Adding to @rbaker's reply, once you have your game created, you would add it to RetroPie as a Port.

@pme said in Logitech Attack 3 Joystick Configuration:

I've read that if you PRESSS AND HOLD any button on the device, it will skip the current configuration option and move to the next (https://retropie.org.uk/forum/topic/2108/can-t-skip-joystick-configuration/5) but this does not seem to be working.

The D-Pad is necessary to be configured to navigate in Emulationstation, you can't skip it entirely. Configure the joystick as D-pad, or use any other of the 11 buttons, and then you'll be able to configure your gamepad in detail in RetroArch or any other emulator you might use.

@mswer Maybe the ROM file is corrupted. Re-copy the ROM back to the ROM folder and retry.

@lostless Hi never tested SRM write by killing specifc emulator IP with all emulators.
I think it has something to do which emulator you are using.
In first instance I try to use siglevel 15 to terminate emu process and this should write SRM files, because this is a prober termination of process. If the emulator is still active after 2 or 3 seconds I try to kill with siglevel 9 and this is a hard breakup and it's very unlikely that a save state is ever written due this signal level.

Not sure what changed, but I went through the WiFi configuration again and it worked this time.

@mitu Thanks man! I didn't know that. I will start doing that as I'm going to mess around with doom and costume images for the scraper, so all my rom hacks look pretty!

@djxxx
https://retropie.org.uk/forum/topic/3/read-this-first
https://retropie.org.uk/docs/Arcade/
https://retropie.org.uk/forum/topic/7247/guide-arcade-games-and-how-to-play-them-a-non-technical-mame-fba-tutorial
https://retropie.org.uk/docs/FinalBurn-Alpha/