We don't support 3rd party images, especially ones loaded with ROMS. Ask the author(s) for support or start with the image from retropie.org.uk/download.

@mitu Again thank you so much! I really appreciate your help.

I had the same issue on my PC with that stick. There's a TINY little note in the instructions that I found:

"DINPUT Mode: press and hold 'Start' and 'Y/triangle' for 3-5 seconds to switch to DINPUT mode."
(with the switch down in DIN/PS3/SNK position)

That might help.

Could it also be 4 way vs 8 way controller? I read 8 way controllers on these games can have glitches when transitioning....it could manifest as control delays. I happen to have a 4 way plus an 8 way setup so I always use 4 way for the old games.

@steve8091 said in Setting up Asteroids Control Panel with USB Controller:

I want to be able to fine tune vector settings, which the default-installed MAME doesn't allow me to do.

But mame2003-plus does. Just FYI.

Thanks for sharing your solution, have fun with RetroPie.

@mitu

Pi Model or other hardware: RPi 4 B+
Power Supply used: (If using a Pi)
RetroPie Version Used 4.6.6 version
USB Devices connected: none
Controller used: ps4 replica

sorry I'm late with this. Could this bluetooth connection problem be connected to the recent hack?

Main Menu => UI Settings => set to off the Quick System Select.

Check this RaspberryPi forum post for issues when using the Pi4 with USB3 SSD disk - https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=245931.

Sadly, it didn't work

If you use a Euro (PAL) rom on a US (NTSC) machine, the game will run fast.
If you use a US (NTSC) rom on a Euro (PAL) machine, it will run slow.

So, if you are in the US running RetroPie on a US TV, you should not use a European rom. You can switch the Pi into PAL mode (if you have a TV that can tolerate it) and it will run at normal speed, but I wouldn't recommend it if you can just get the US version instead.

hdmi_safe will set the resolution to 640x480, if your monitor supports a higher resolution, you can set it by using hdmi_group=2 and hdmi_mode set to one of the values detailed in https://www.raspberrypi.org/documentation/configuration/config-txt/video.md. You'll probably have to add hdmi_ignore_edid=0xa5000080, my guess is that your monitor supplies a wrong EDID and the Pi tries to set the video resolution to an unsupported value.

This issue is now fixed as of 8-24-2020. Update from source if you experience this issue.

@jbsapp Unfortunately, no. I stopped searching for a solution after awhile, since it doesn't bother me that much. Actually, I came to appreciate that the beautiful Comic Book Theme is shown from time to time this way.

A friend of mine who is an electrician suggested to short-circuit the port in question by sticking a piece of wire in both sockets. I never got around to do this unbelievably complicated operation, though. 😇

@VictimRLSH

Thank you .. Glad to know a 2gb is what i need for gaming since i have no use for the desktop feature at the moment

@BuZz Thanks Buzz! I have now set it up to boot directly into Retropie. No issues so far.

Hey, thanks all. I changed this around as suggested and it worked.

Button 5 is real block and 6 is "quick block".

@amurphy9495 probably similar to https://retropie.org.uk/forum/topic/27559/. Please add some info about your system, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.

You press Start to open the EmulationStation menu. How exactly did you de-activated the on-screen help or switched themes ?