Sorry man. asking for Rom's is a big no no. All I can say is you need the Bios and the roms you want to play and both are super easy to find with google.

I took a brake from trying to set up a full rom set and decided to focus on a few games that I wanted to play. I also decided to put all my NeoGeo games in the NeoGeo rom folder, still using FBA.

FBA is still giving me issues with some games but by adding games a few at a time it more manageable to deal with. It also means that I end up with a list of games I might actually play.

I'm sure I'll be posting more questions later but my first step should not be to ask. For example I cant get \ Dungeons & Dragons - shadow over mystara & Dungeons & Dragons - tower of doom are not working for me, but before I do I need to do some more reading on my own. Like do I need more bios, is my rom's missing HCD, or something else I'll probably be able to answer with a little reading on my part. Half of the fun of this hobby is in the learning.

My advice is to Google first, next do some reading on the wiki and other documentation, then search this forum, and finally if you still can't find a solution then post your question.

@meleu Came back to do it but it looks like a mod beat me to it. Thanks again.

I see. So the Xbox dongle would in port 0, the nes in port 1, the DB9 connectors (if this works) in port 2, and the "rom drive" in port 3. Now, what about using a USB hub? I bought a 4-port hub to connect USB devices to (like keyboard, mouse, etc) via the cartridge slot. Should this be plugged into 0, and then the Xbox dongle plugged into that? Or would it make more sense to connect the rom drive to that and have it plugged into port 3? I found out the 4-port (usb powered) hub isn't powerful enough to supply power to my keyboard, so I'm going to the computer store tomorrow to buy a powered one, and was thinking a 7 port one would work nice. The kind with 4 on one side (available via the cartridge slot) and 3 "internal" that I can connect things like the NES ports too. I'm just trying to figure out the best way to do it.

So is at all possible then the idea of having interchangeable controllers?

@Rcs we have no clue what version of retropie, raspberry pi (also what version of pi) or pc or any of the other stuff that readme says you need to give us info on. If you give us something to start with then maybe someone can help. I would start by going into the file /boot/config.txt and removing the hashtag from the beginning of this line:

#hdmi_drive=2

So it looks like this:

hdmi_drive=2

Then save and exit and then reboot. If you are using a raspberry pi and you dont ftp into your pi then plug in a keyboard and hit f4 to get to the command line. Now type:

Sudo nano /boot/config.txt

Now scroll down and until you find the line that says:

#hdmi_drive=2

Then remove the hashtag so it looks like this:

hdmi_drive=2

Then save and exit by hitting "ctrl & x"at the same time then "y" to save. Then type

sudo reboot

in the command line. Also when in emulationstation hit your start button on your controller, go into sounds and change the volume from 77% to 100%.

If that doesnt work then you need to give us more info on your setup just like that "read this first" link tells you what all info we need.

I’m not sure why my perl installation got broken, but I was not able to fix it. I ended up with a fresh Raspbian installation. Now everything works fine egain.

@trekdrop said in Daphne black screen:

One big question... Do you have badlands running?

I just tried Bandlands. I cannot get it to work. Same issue. Same weird writes in the log file. Black screen.

I did remove the DAT file and it actually did the parsing just fine and when it first started, I saw a glimpse of the "Wanted" sign, which is the first image you see when the game loads, but after maybe a frame of that video, it went black and stayed black. I exited after waiting 10 minutes or so.

I'm sure someone must know??

Thanks a lot!

Think there is ever the chance that the devs might add in before configuring a console controller the option to configure a non-console encoder like iPacs are?

@dankcushions thanks!

Just an update, I fixed the issue and now it's running beautifully. It turns out I was following the directions correctly, but I had no idea I had to remove the #. If I hadn't asked, I wouldn't have known so thank you guys for all your help!

Thanks for your help guys, I will install retropie and then the desktop environment.

Thanks I'm not sure if it is the controller though, I was testing everything on a pi 1 model B and it worked fine every time I rebooted. Granted I wasn't using the powered hub at the time.

I'll try eliminating the hub and report back. If it is just the controller that's fine once the same thing doesn't happen with the arcade encoder :D

http://pastebin.com/jfKLrumc

Pastebin of the STD out file

This is the output of tail -f /tmp/dumps/steam_stdout.txt
When attempting to launch lr-picodrive from inside emulation station that is launched from SteamOS.

@II12yanII

https://retropie.org.uk/forum/topic/3/read-this-first

https://github.com/retropie/retropie-setup/wiki/Playstation-1

https://github.com/retropie/retropie-setup/wiki/Playstation-1#why-arent-my-bin-files-showing-in-emulation-station

So I am going to say installing the SteamOS driver is probably a bad idea seems to have broken standard functionality. Specifically after disabling and removing the driver.
Having to rekick now to get it back to normal.

@mediamogul

That's a good idea in theory, but you're already running into major issues that could very well be isolated to the VM environment and never even be seen when using an actual Pi.

I think your right. Hopefully I will get a RPi3 Model B for Xmas.