@sleve_mcdichael said in 32x Game Titles showing rom symbols after scraping:

Are you running SS through the setup script or from the command-line? If script, do you have generate options >> remove bracket info (enabled)? (This is global, but maybe if 32x is the only system you've scraped since it changed or something.)

Beyond that, the contents of your /home/pi/.skyscraper/config.ini file might shed some light on what's happening. You can post it here if you can't make sense of it.

``` Use code blocks (start and end with three backticks on a new line) so special symbols aren't interpreted as formatting. _*[{}]*_ Or upload it to (edit:spelling) pastebin.com if it's very long. ```

Yep toggling that option on solved it. Thanks!

@folly IWill do. I've spent the last couple of days mostly wading through over 1000 Atom files just called 1, 2, 3, 4 etc, which actually turned out to be Retropie-compatible DSK files, just figuring out what they all were. (I'm about 30% done.) Once I've identified the games and got their controls configured I'll upload the configs.

See https://retropie.org.uk/docs/Updating-RetroPie/

@fadangalini to be honest manually changing the files is not recommended. you should bind your default during https://retropie.org.uk/docs/First-Installation/#configure-controllers, then any overrides for specific consoles via https://retropie.org.uk/docs/RetroArch-Configuration/#core-input-remapping

/dev/shm/retroarch.cfg is here:
https://pastebin.com/embed_iframe/YyUgG611

this isn't a verbose log.

I've been meaning to post this for some time now, but the pandemic and other things in life sidetracked me. But, I made a bit of positive progress getting the controller to work with Spy Hunter and wanted to share some of the info (hopefully I'll remember things correctly!).

I found some info indicating that the lr-mame2003-plus emulator had better support for analog controllers than lr-mame2003, so I switched to use that:
Screenshot from 2021-04-05 12-20-40.png

Once in Emulationstation, I enabled the X-INPUT mode of the steering wheel, and it was detected as a "CHIPUNION USB RACING WHEEL"
Screenshot from 2021-04-05 12-39-15.png

Then, within the Retroarch configuration menus, there were now options for the axis configuration (+ and -) involved with the gas and brake pedals, and steering wheel (paddle):
Screenshot from 2021-04-04 15-38-25.png

I then tried playing a few games, and found the acceleration of Spy Hunter's car was a bit sluggish. I adjusted some of the sensitivity settings for the gas and brake pedals, and the steering wheel (paddle):
Screenshot from 2021-04-04 15-39-42.png

Though not perfect, it made the gameplay good enough that I got through the initial round of cars, got the oil and smoke defenses, and almost made it to what I think would have been the motorboat segment of the game.

If I make any other headway, with either Spy Hunter or other steering wheel games, I'll try to post back here with an update.

@jimmyfromthebay ,

They are different sizes:

pi@retropie:~/RetroPie/roms/atari5200 $ ls -lhart *Dig* -rw-r--r-- 1 pi pi 16K Jul 13 21:52 'Dig Dug (1983) (Atari).a52' -rw-r--r-- 1 pi pi 17K Jul 13 21:53 'Dig Dug c (1983) (Atari).a52'

@sirhenrythe5th Hmm... It's been more than a few days, but when I update RetroArch, all I get is 1.9.5. Am I doing something wrong?

@dankcushions

That was is it! Used the sub folders. As always, Thank you!!

@plastyk
Try this simple tutorial here : Development of module-script generator for lr-mess and mame standalone
You will be able to run it with Lr-Mess and MAME standalone.
The name of the game folder will be svision (for supervision),

The controller configuration for Daphne is explained in the Docs.

lr-daphne seems to be dead (only one minor commit since Sep 2019). The most promising Daphne fork at the moment seems to be Hypseus-Singe. It is mainly discussed here and here.

Looks like a bad video cable.

@whyza

specifically the problem is with package

chromium-browser 88.0.4324.187-rpt1

work around is to install chromium meta package

sudo apt-get install chromium

which installs

chromium 90.0.4430.212-1~deb10u1

and the issue is worked around.

@datractor please fill in all of https://retropie.org.uk/forum/topic/3/read-this-first for a specfic game that doesn't work

@mitu Thanks, it worked

@dktpi then no, it's not possible. Virtualbox runs only on a PC system (Intel/AMD CPUs) and not on a Pi (which has an ARM CPU).

@crimson0087 You could try the above solutions and see if that helps, don't know anything about the flirc case but you could try to see if the post below also solves your issues, look at the post by @luedi :

https://retropie.org.uk/forum/topic/27921/ssd-causing-lag/10?_=1626094802543

@g2000 said in Retropie x86 on GalliumOS - Baytrail audio issues:

@johnodon - THAT DID IT!!! Omg dude thank you! I've been loosing my mind with this. So it ends up there are two resolutions this thing picks up. It defaults to 1366x768 that has two refresh rates 60Hz and 40Hz. The next one is 1360x768 and runs at 60 - 59Hz. Switched it to that and magically it just worked. Cant believe it was something that simple. Canτ thank you enough!

Been there. :D More often than not, 4K TVs are the culprit.

@mitu i updated the firmware to the latest release v1.36 and tested the result yesterday evening.
A step forward: the pad does now work perfect when it is connected wireless.
As soon as i use it wired the strange behavior returns :)
But in the end i can live with that, i now can finally try all the games that do not show up importent text in "lr-ppsspp".