For the record the 'X' button on my XBox360 Controller is detected as 003 via hypjsch

So I doubled checked that against the Joystick API config:

KEY_BUTTON2 = SDLK_LALT 0 3

And again 'X' was FEET and played fine.

@BurndtJamb said in help installing screen driver on pi zero 2 w with retropie:

. I can't get ssh working since i don't know the ip address due to not having a screen. is there either a way I can install the necessary stuff without ssh?

If you don't have a direct interface (i.e. monitor + keyboard) to the RPI, then you need SSH. If you don't know the IP, you can try connecting using the hostname instead - for the RetroPie image the hostname is retropie (you can also try with retropie.local)

@duglor

The only thing I can think is to enter the runcommandmenu when you start a game and try to select a different resolution.
Really a long time ago since I used this stuff and no time to look into it.
Might be that someone else has an idea.

Please include all the info requested in https://retropie.org.uk/forum/topic/3/read-this-first to be able to assist you.

I just started to begin with DSi Emulation, using lr-LemonDS, and came to the point the tutorial ends: games will only start via the DSi-Menu, so "boot directly into rom" has to be disabled in the core-options.
Only difference: i have full access to the DSi-Roms in the /ROMS/DS-Folder from there and dont have to use prestuffed NAND-Files (would also be a fishy way imo, not the way it should work)

And this is an issue:
first of all on the official FAQ-Board it is recommended to keep this option at its default (=off/boot into rom), in special when the DSi-Bios is used.

Secondly the Retroachievements for DSi-Games only launch up when booting directly into the rom, you can see the widget, everythings fine.
Only problem: the screen keeps being white and silent.

Booting into menu works as mentioned, so the BIOS-Files are good for sure.
I can start all my games from there, but without Retroachievements Support, so i hope to find a way to boot directly into the game (as it should work :)).
I allready tinkered with further core-options, but had no luck.
If anyone has an idea it would be much appreciated.

It's a closed source 32bit app. You're on a 64bit OS, so it won't run

It works on the 2010 MAME core in Retroarch.

Looking for a save for this game (MK2Plus) and UMK3Plus with complete unlocks. For Retroarch FBNeo Core.

The ones from Fightcade's FBNeo emulator don't work... I get a CMOS error, which makes it go back to default factory settings.

Can anyone provide a hand? It would be greatly appreciated.

@Plantor07 been literally dealing with this for days with 8bitdo and Stadia. Tried this and it worked for me.

https://github.com/atar-axis/xpadneo#installation

And yes, in hope rather than expectation I did try changing:

config_version=3.6.0

to

config_version=5.7.1

It did not, of course, help, except that instead of dumping to a Workbench 1.3 "insert disk" screen, the game now dumped to a Workbench 1.3 "insert disk" screen in the wrong aspect ratio.

@mitu thank you man!
you are great! ( as always....))

Well, the OP should just move to MAME current tbh, not only it has support for TATE in both directions, but it probably also has better support for cocktail mode (i highly doubt all cocktail fixes from the past 22 years were backported to MAME2003+).

As for FBNeo, it is not suitable at all for cocktail setups : some games had their 2P mode and cocktail mode tied together, and ended up being un-cocktail-ified so that 2 players could play them without requiring a cocktail setup.

@mitu

I’ve tinkered with clrmamepro before but my results kind of sucked with it. The last time I had to do any of this was with the good tools way back in the original Xbox one days.

Any direction for a good tutorial on how to use Clrmamepro the proper way as I obviously had no idea what I was doing even tho I followed a guide lol.

Any other noob friendly sorting by .dat tool recommendations would also be appreciated, like I said it’s been a long long time since I’ve had to do this or anything like it and things appear to have come leaps and bounds since then

neither of these things (permissions or starting clean) seemed to resolve. I also @ByteThis did not seem to rectify this by only configuring player 1 (but good idea) With a clean install and remapping all the input settings I am getting to where the select and start button only work in the retropie menu (scrolling diffrent consoles exploring settings etc.... But when I launch a rom NONE of the bottons work.

I ran some more jstest output today....

davis@raspberrypi:~ $ jstest --normal /dev/input**/js0**
Driver version is 2.1.0.
Joystick (DragonRise Inc. Generic USB Joystick ) has 7 axes (X, Y, Z, Rx, Rz, Hat0X, Hat0Y)
and 12 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, BaseBtn6).
Testing ... (interrupt to exit)
Axes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off

davis@raspberrypi:~ $ jstest --normal /dev/input**/js1**
Driver version is 2.1.0.
Joystick (DragonRise Inc. Generic USB Joystick ) has 7 axes (X, Y, Z, Rx, Rz, Hat0X, Hat0Y)
and 12 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, BaseBtn6).
Testing ... (interrupt to exit)
Axes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:ofAxes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off

So it sees both controllers, but does not detect any button or axis input events. I think It is time to just replace them. Ive had them over a year and the more I think about it the more I think I possibly damaged these things. They used to be mounted in a metal cabinet and the opening I cutout for the control panel was very tight. (see attached called "old") old.jpg

New cabinet.......

new.jpg

I think its time to just replace the usb encoders.

Thank you!!!

3.17.4 is out to fix all the reported problems. 🙂

@gilllig said in Retropie doesnt boot with changed config:

Ive installed raspOS and retropie, but now they dont even run))

What exactly does this mean - they're both not running ?

I tried to choose emulationstation at the settings, I tried to add line "/usr/bin/emulationstation" in the /home/pi/.bashrc, but its not working...
I cant understand how to make autostart for raspOS or for retropie

You're running in an unsupported configuration, as I mentioned in my previous post, so you should not use the normal RetroPie auto-start options from the menu.

If you have installed the RaspiOS with Desktop, then just use the default option to boot to the Desktop. You can start EmulationStation from a terminal by typing emulationstaton. If you wish to automatically start Emulationstation after the boot to desktop is done, then

create the $HOME/.config/autostart folder add a .desktop file with the command to start the terminal and EmulationStation (lxterminal -e emulationstation).