@jimmyfromthebay ,

They are different sizes:

pi@retropie:~/RetroPie/roms/atari5200 $ ls -lhart *Dig* -rw-r--r-- 1 pi pi 16K Jul 13 21:52 'Dig Dug (1983) (Atari).a52' -rw-r--r-- 1 pi pi 17K Jul 13 21:53 'Dig Dug c (1983) (Atari).a52'

@sirhenrythe5th Hmm... It's been more than a few days, but when I update RetroArch, all I get is 1.9.5. Am I doing something wrong?

@dankcushions

That was is it! Used the sub folders. As always, Thank you!!

@plastyk
Try this simple tutorial here : Development of module-script generator for lr-mess and mame standalone
You will be able to run it with Lr-Mess and MAME standalone.
The name of the game folder will be svision (for supervision),

The controller configuration for Daphne is explained in the Docs.

lr-daphne seems to be dead (only one minor commit since Sep 2019). The most promising Daphne fork at the moment seems to be Hypseus-Singe. It is mainly discussed here and here.

Looks like a bad video cable.

@whyza

specifically the problem is with package

chromium-browser 88.0.4324.187-rpt1

work around is to install chromium meta package

sudo apt-get install chromium

which installs

chromium 90.0.4430.212-1~deb10u1

and the issue is worked around.

@datractor please fill in all of https://retropie.org.uk/forum/topic/3/read-this-first for a specfic game that doesn't work

@mitu Thanks, it worked

@dktpi then no, it's not possible. Virtualbox runs only on a PC system (Intel/AMD CPUs) and not on a Pi (which has an ARM CPU).

@crimson0087 You could try the above solutions and see if that helps, don't know anything about the flirc case but you could try to see if the post below also solves your issues, look at the post by @luedi :

https://retropie.org.uk/forum/topic/27921/ssd-causing-lag/10?_=1626094802543

@g2000 said in Retropie x86 on GalliumOS - Baytrail audio issues:

@johnodon - THAT DID IT!!! Omg dude thank you! I've been loosing my mind with this. So it ends up there are two resolutions this thing picks up. It defaults to 1366x768 that has two refresh rates 60Hz and 40Hz. The next one is 1360x768 and runs at 60 - 59Hz. Switched it to that and magically it just worked. Cant believe it was something that simple. Canτ thank you enough!

Been there. :D More often than not, 4K TVs are the culprit.

@mitu i updated the firmware to the latest release v1.36 and tested the result yesterday evening.
A step forward: the pad does now work perfect when it is connected wireless.
As soon as i use it wired the strange behavior returns :)
But in the end i can live with that, i now can finally try all the games that do not show up importent text in "lr-ppsspp".

@nevsan please fill out ALL of https://retropie.org.uk/forum/topic/3/read-this-first including image file name and verbose log.

@sleve_mcdichael actually neverminded, that worked! I did a fresh install of RetroPie on another SD card and added the commit code version number 110020000 to the ppsspp.sh file after master. Then I Installed from source and it installed the right version (v1.10.2). Games that were broken are working again. Really appreciate the help!

EDIT - For others trying to do this, do the following to install PPSSPP v1.10.2:

Make sure the PPSSPP emulator package is not installed (remove it if it is) Open file /home/pi/RetroPie-Setup/scriptmodules/emulators/ppsspp.sh with the editor of your choice Edit the line :
rp_module_repo="git https://github.com/hrydgard/ppsspp.git master"
to be :
rp_module_repo="git https://github.com/hrydgard/ppsspp.git master 110020000" Save your changes to the file Install PPSSPP emulator package from source

@natlofthouse said in Need a bit of guidance…:

@muldjord
I just need to find the ROMS.

There's a thread about Where to (legally) acquire content to play on RetroPie. Note that the thread starter can't keep up with updating the list in the opening post with the stream of suggestions from others there. So, after reading the list, you should also skim the thread backwards from the end to see the most recent suggestions.

going off on tangents here, but: RetroPie -> Run Command Configuration -> set Joy2Key version to udev (instead of sdl) seems to have fixed the issue with the config menus not responding to controllers in the latest RetroPie update, although the pop up option to edit emulator configs no longer seems to show up during game loading
PPPS: Re-enablng the launch menu from the same area will fix that last part.