As @mitu said. The reason behind it is that the mappings are stored under the name of the controller in the directory /opt/retropie/configs/all/retroarch/autoconfig/. Thus, if you have identical controllers, only one mapping will be stored for both of them, and if their wiring is different, their common mapping won't fit one of them.

edit: "will be" -> "are" + "doesn't" -> "won't" 😉

@JDMDingo said in Force HDMI over Raspberry Pi Official LCD Screen:

@sli4 let me know if you got it running. Did you make the files (initDisplay.sh, config_hdmi.txt and config_lcd.txt, hdmi.name) in windows? Is so you need to convert them by using:

sudo apt-get install dos2unix sudo dos2unix /home/pi/initDisplay/initDisplay.sh

I also converted the config files, however that was probably not necessary.

Also the original post is not really clear about the configs. You copy all the text from config.txt and paste it into config_hdmi and config_lcd. Inside config_hdmi.txt scroll down untill you see “#hdmi_drive=2” and remove “#” then scroll to the bottom and add “ignore_lcd=1”. In config_lcd.txt scroll to the bottom and add “lcd_rotate=2”.

This is the clearest part of the thread. Thank you. I was getting very confused at the start.

@E3L1 , try this:
In terminal type:
sudo nano /usr/share/alsa/alsa.conf
Then Change
defaults.pcm.card to 1
To
defaults.pcm.card to 0
Save, exit, and reboot.

@mitu

Integer scaling fixed it. Thank you, good sir. :)

@Boochk said in Lr-Atari800 800/5200 Cannot Save 800XL or 5200 Console In Config Files:

Thank you Mitu for your help! By the way, somehow I was launching a different menu that changes where you change the emulator lr-atari800 and atari800 and looking there for the settings.

That's the Runcommand launch menu, allowing you to switch between emulators (where there is more than 1 for a system/console).

Glad you got it fixed, have fun with your RetroPie project !

I already try this and the result is the problem returning when I add a new game to favorites.

Yesterday I do some tests and the problem occur with Snes, Megadrive and Nes gamelist.xml. I don’t know the the reason and not see any difference between the files.

2nd Advanded mame it works so much better with spinners. actually advanced mame is newer than Advanced mame 1.4 its 3.9.

@chubsta said in Clarification on running roms from usb drive please:

Transfer the existing RetroPie file structure

That's clearly under the Manual Mount section and - obviously - in direct contradiction with the previous sentence from the Automatic method

It will proceed to automatically copy the RetroPie folder AND all of its contents (you may need to reboot to start the copying)

I see lr-hatari can load an .m3u to allow disc control from retroarch. It will be automatically read from an uncompressed zip along with disk images.

Edit
It won't work within a zip, but works great loading directly from an m3u. Also, the disk image extension cannot be changed (eg. .disk1).

I changed the disk extension to uppercase and removed it from es_systems.cfg

I suppose you could use a hidden folder as well.

@johnes You can map then using the Mame internal OSD menu (pressing TAB) to MAME emulator actions, but not to RA's hotkeys.

First and most obvious question: are you sure that your PAL Roms aren't simply being sped up and running at 60Hz?

The refresh misalignment from a 50Hz game on a 60Hz display isn't all that noticeable, and certainly not in games that run at frame rates lower than the console's host refresh rate. Chaos Engine and God's definitely fall under that category as games that run at 25fps/30fps.

If you have games running at a smooth 50fps on 60fps display and there's a lot of movement along one axis (horizontal or vertical scrolling), the judder will be somewhat more apparent.

RetroPie emulators can be configured from the emulator launch menu to support a 50Hz refresh rate if your display supports it. I've found that this does make a slight but worthwhile difference, especially with C64 and console games.

*Temporary Fix *

Well I finally got to the bottom of this. Amiberry does not register when button 15 (select) or 16 (xbox) are pressed on an Xbox One 2016 Bluetooth pad (maybe some other Xbox pads as well). The short term solution is to assign the Hotkey to another button that is not used in Amiga emulation e.g. 14 (right analogue press).

Is it possible to make a dedicated Amiberry joypad config file in Retorarch that only Amiberry will pick up on. While I'm at it could I do the same for other emulators such as LR PCSX Rearmed?

Thanks to Horaceandthespider at Github for help in resolving this.

Great ! thank you very much for an explanation, I will look at that !

@SeraphisCain The build/install script for the package is not updated right now, you'll need to have a bit more patience - it's not something on your end.

they have corrected the sources, we can not yet install from the menu, but we can compile it in the directory tmp/build/lr-mrboom using a parameter:
sudo make HAVE_NEON = 1

and that compiles well!

Can you please add more info about your system, as requested in https://retropie.org.uk/forum/topic/3/read-this-first ?
How are you trying to wake up the system - keyboard, controller, etc ? If you're running a screensaver, consider disabling the power saving option in ES.

For the audio part, try adding audio_pwm_mode=2 to your /boot/config.txt and see if it improves the sound cutting part.

yes I think it works, it's the automatic start that does not work, I'll watch this, thank you very much !

I'm a casual gamer, I'm sorry I don't even know where to begin
my system?
jtest?
nood here lol

Have you tried microcenter they are not too bad like 50$.

480 ssd are going for around 50$ may be the way to go but you would have to get a external enclousure.

Version 2.7.6

I have an image all set up for my RPi, but I recently got an odroid XU4 and am looking at porting as much custom esthetic as possible.
I do see that the RetroPie branch does not have the converted .cpp folder. Honestly this whole project for me is about learning how these systems work.

Thank you again for your quick response :)