@saccublenda
If i remove the gamelist.xml from the amiga folder the loading screen take couple of min'.
if its still theres takes around 20min' ...

Try moving your amiga roms to another directory to see if the 2 minutes of loading time are due to the large number of roms.

and yeha 9990 and around 5000 reg' in the gamelist.

Ok, that is a number close to my previous estimate. Actually your gamelist contains 10233 entries, and as I expected there are many duplicates, that is the same game is listed as adf, hdf or uae. I suggest you to remove these duplicates both from the rom directory and from the gamelist. This should reduce both the number of roms and the size of your gamelist, and reduce the loading time. I have gamelists with ~ 2500 entries and they take few seconds to load.

@langest said in Possible to rotate screen per rom file?:

Now I am only wondering, where should I put the rom specific file?

As the posts above said - and it's also mentioned in the Docs - , next to the ROM file.

Is this because the Xarcade2jstick emulates as an Xbox controller or am I missing something because this wired USB controller is effectively controller 3?

No and yes - the new controller is most likely assigned the P3 slot and it won't work as a P1 or P2.

I am sure I am missing something simple, but I would love to know since I want to add a second wired controller to have games play head to head using gmaepads, not the tankstick.
And moving forward, I want to add another pair of USB Nintendo like controllers for the simple games..

Since your Tankstick is always connected, it might always be assigned the P1/P2 slots, so any new controller(s) will appear as P3(P4, etc.). You can re-order the controllers with something like https://github.com/meleu/RetroPie-joystick-selection or with the Configuration Editor.

@mitu said in retropie vs. retropie-mount directory in USB drivers:

The copying part takes place only the first time you insert the USB stick, just to set-up the folder structure.

I had figured that, but had not explicitly stated it. Thank you for clarifying it!

I have a controller name as "SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller " too.
Have tried it with the retropie 4.5.18 with sixaxis driver (third-party), ps3controller driver(both gasia and shanwan ) or even xboxdrv, neither of them works.

I followed some guide, and it suggested sudo.

What tutorial ?

Now when I start it without, I get a bunch of permission errors.

Right.

Any way to easily roll back/reinstall/fix?

See which files are not correctly owned (root instead of pi) and change the owner with chown.

Try creating an empty file (basic.tap) in the ROM folder and load it.

@sirhenrythe5th Just did it by changing the User 1 Input Binds under Settings>Input, then Saving Autoconfig. Really really hope I haven't just saved a new set of control overrides for all FBNeo games :(

Ok. Cannot be done :)
Thanks for your reply.

Brilliant! Thanks for your help, works like a charm. I can now use this for my other custom systems too!

Thanks again.

@mitu it works fine. Thank you.

@shavecat I have never tried those two games. But I noticed big performance boost after I overclocked my PI. I have GoldenEye installed, but never played jet. Maybe I will try it today and let you know.

@NZMun Here is an unofficial mirror. https://bret.dk/mirrors/retropie/
@mitu Not sure if this is allowed, so delete if it's not.

@jonjon1977 you only answered the second question.
Please follow the link Mitu gave you and give proper information about your system.

Plus the USB 3.0 ports on the pi 4 are blue

@francis2019 said in Advance Mame sample sound not working:

when i go to the network folder in windows bios is not in caps

That's the file share name, not the folder name as seen by the Pi.

@lawrencejd Please open a new topic explaining your issue and add the info requested in https://retropie.org.uk/forum/topic/3/read-this-first.
It's bad forum etiquette to bump years old topics, even if related to your issue.

If you never updated in 2 years, then updating/reinstalling now produce the correct results.
Instead, open the retroarch.cfg file from \\retropie\configs\psx and make sure it only contains these lines:

# Settings made here will only override settings in the global retroarch.cfg if placed above the #include line input_remapping_directory = "/opt/retropie/configs/psx/" #include "/opt/retropie/configs/all/retroarch.cfg"

@toto2000 said in Which emu for ESPGALUDA 2 ?:

I thought that even 2D rendering could take advantage of OpenGL / Mesa 3. Fba uses that I think, for accelerating 2D rendering cycles...

It's not about being 2D or 3D, it's about being software or hardware rendered :

software renderer will render everything on a framebuffer then pass this to whatever backend is used for rendering hardware renderer will render the various elements using directly the gfx apis and let the gpu compose everything, meaning they are only compatible with the gfx apis they were written for

While it's totally possible to render a 2D sprite by directly using a gfx api, it was never done in either MAME or FBNeo.