The display order is they're entered in es_systems.cfg file. If you want to re-order them, move the <system>..</system> entries in the configuration file.

anyone know of a way to convert sharp x1 .tap files to a format that lr-x1 can load? this seems to be a pretty obscure question.

Hello @mitu

Thank you very much for your hint about KMS in the config.txt file.
I really didn't paid attention to this.
It was really commented, I don't know why. I didn't ever edit this file.
Now the installation has finished successfully.

The solution was really uncomment the two lines below regarding KMS dtoverlay into /boot/config.txt (and restart) :

[pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] dtoverlay=vc4-fkms-v3d start_x=0 gpu_mem=256 hdmi_enable_4kp60=1

Thank's a lot for your help. I hope this topic may help many other friends to enjoy Retropie.

Kind Regards.

@simpleethat I didn't think I could, but I just had to ask. Thanks for the reply! :)

@neurocrash Nevermind, it was supposed to be opened with the Hotkey+X button, but on the diagrams for controller buttons reverse the X and Y keys, so I had them mapped backwards.

@mitu that will lose the input config script trigger. To clear es controller config, there's an option in RetroPie-Setup in emulationstation configuration.

@neurocrash said in Can't enter RGUI menu anywhere:

The result is that the hotkey that works for me is Hotkey-Y, which is the same as the Hotkey-North button. When using this combination, all of the devices can open the RGUI menu.

The North button is the X button, not the Y (yes, the XBox controller is backwards).

Yay! @mitu you are awesome. Thank you!

It turns out that the GPi uses the "windowed" version of the settings, so I needed to add the following to /opt/retropie/configs/all/retroarch.cfg

menu_widget_scale_auto = "false" menu_widget_scale_factor_windowed = "2.75"

For what it's worth I had actually stumbled on this setting when messing around but I set the non-windowed value (because it's full screen... I assumed that meant it wasn't windowed) and when that didn't fix it I moved on.

Try installing the xpadneo [1] driver and re-do the configuration for the controller - pair it via Bluetooth and configure it in EmulationStation.

[1] - https://github.com/atar-axis/xpadneo

Back-up your ROMs/BIOS/Configs via file shares from you exiting Pi 3 installation - see https://retropie.org.uk/docs/Updating-RetroPie/#making-a-backup-option-2, then install/flash the new Pi 4 image on the SD card. After installation restore the files you backed up in the previous step using file shares to the same locations (BIOS/ROMS/configs).

It's always advisable to make a backup of your existing installation, but you already did this,

@Wojima said in Override cfgs won't load:

I also have Save Configuration on Exit and Use Global Core Options File turned off.

You should save a game remap file, not a game override, I don't think input controls are saved in configuration overrides - see https://retropie.org.uk/docs/RetroArch-Configuration/#core-input-remapping.

You can also leave the global core options on, if you want a per-game option file, then you can save game options just as you do with overrides/remaps.

@duiz Here is my idea for fixing your resolution problem.

Firstly, try this.

Change this:

#disable_overscan=1

To this:
disable_overscan=1

Reset and see if that fixes it.

If that doesn't work change this :
#framebuffer_width=1280
#framebuffer_height=720

To this :
framebuffer_width=1920
framebuffer_height=1080

Make sure to remove the # before those lines.

If it doesn't work be sure to put it back the way it was.

Hopefully one of those ideas helps.

@hackedmacbook111 said in Mupen64plus-gliden64 from source is broken:

I used mupen64plus on pi3B+ and it freezes with glide 64 games have more lag than with impending 64 plus
I recently updated 4.5 to 4.6

Start a new topic, this issue has been solved and isn't the same as yours.

I installed dolphin on Ubuntu 20.04 it ran Mario Kart Wii Ok I use 4GB of ram

thank very much