@Egg90

Hey just saw this post today!

I am not sure if you got it figured out but I was having the same problem and what I ended up doing was not using brackets or quotes for the memory card file location. I also had to make sure that -loadbin was the last command before "%ROM_RAW%" or I got an error saying it couldn't load a .exe.

It should look like this:

<command>C:/Users/Emulator/.emulationstation/systems/Playstation/ePSXe.exe -nogui -slowboot -analog -loadmemc0 C:/Users/Emulator/.emulationstation/systems/Playstation/memcards/epsxe000.mcr -loadbin "%ROM_RAW%"</command>

I hope that helps

I'm having a similar issue at the moment. I've been trying for some time to get Joust working (it's my all-time favorite video game on any platform!). I just recently figured out how to reset the game to get it to actually start up, but now I can only control it via the keyboard. My 8bitdo SNES30 controllers don't seem to register any button presses, but they work fine for all other MAME games. The behavior seems to be the same for lr-mame2003 and mame4all. Any ideas? I'm on the same hardware and software versions as the OP.

wanted to add that when I launch the file-manager I am taken to the boot up screen with all the green ok's.

@nyvia Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

@YourMomNova if you have a slow micro sdcard system updates can take a long time.

And there are the 2600-daptor and 2600-daptor 2. There's a thread with a link to modded RetroPie for a project to support it here, so possibly that work could be integrated into the main RetroPie for the RPi A/B/B+.

@mediamogul Thanks as soon as you mentioned that I went in to prefs and you were right. So I changed it to Unicode (UTF-8)

@RetroFreak89 Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first.

you have been asked this before - if you want to get help, you need to provide the information requested in that post.

you can change aspect ratio for retroarch emulators from the configuration editor - https://github.com/retropie/retropie-setup/wiki/Configuration-Editor

This appears to be fixed...

I updated Retropie setup to 4.1.10 just now, then did an 'install from source' for lr-pcsx-rearmed.

That fixed it! I can set pad 1 to "analog" and keep the rest as "standard" and this is now correctly detected by any games I play.

I'm super confused by this, because it doesn't look like there have been any commits to this core since I filed the bug. Maybe it was a RetroPie bug?

Can anyone else who's been having this problem please try updating your biz and let me know if it fixes it for you too?

@RandoCalrisian sorry. I wish I wish I knew more about the firmware. My IPAC4 device is an older version that uses a PS/2 to USB converter and it does not get recognized as a game pad at all. It's my understanding that this issue affects only the newer versions of these devices. I hate to send people to Andy for support every time, but as far as I know, he has been the only source cited by people who have obtained the replacement firmware. However, perhaps he has now incorporated it into the utility available online.

@BuddhaOhneHals Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

lr-mess won't work on Raspbian due to old gcc so we don't have a working mess currently for Raspbian.

@videofx From the output you've given, it looks like your PS3 controller is not being picked up. There should be an entry with a line similar to N: Name="Sony PLAYSTATION(R)3 Controller".

Try running cat /proc/bus/input/devices without running an Intellivision rom to see if the PS3 controller appears in the output. I presume you have it connected by USB? You may need to press the PS button to bring it out of its stale state.

Hi Graboid, sorry for such a delay in getting back! First chance I have had to have a proper look at this. I have followed your steps and I am 100% wired up according to your wiring diagram. I add the usb quirks line and reboot. On rebooting, none of the buttons work at all. I have tried pushing select and x together (as well as every other combination of two buttons) and cannot access the retroarch gui. I tried hitting f1 on the keyboard too and this won't do anything either so I can't see any way of accessing the retroarch gui to even see whether it now sees it as two controllers. However Lstest does show it as two controllers...

any ideas? really appreciate your help and hopefully I can get this running! I am using a pi 3 and retropie v 4.1 (have tried older versions too). What are you using and what version of retropie are you using?

@Aksen I forgot I already made a date file for neogeo only for the latest lr-fba in this thread here

This data file is also on the wiki page.

hey mate, i'm stupid.
i wiring alla exactly buttons and joy of player 1 in player 1 side of xin mo.
and player 2 in p0 side of xin-mo.
i unmount all wirings, and so, i after swap all wiring:
so
player 1wired to p0 side
player 2wiredto p1 side

joystick of player 1 and 2 in up and down movements WORKS,
select and start of p1are swapped after mapping and reboot,
select and start of p2the same swapped after mapping and reboot,

i can fix this about swapping select and start of player1?

here my cmdline.txt

# code block dwc_otg.lpm_enable=0 console=serial0,115200 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 logo.nologo consoleblank=0 usbhid.quirks=0x16c0:0x05e1:0x040 plymouth.enable=0