@mitu Ah, ok. :)

@grant2258 Thanks!

I just followed this guide.
https://github.com/RetroPie/RetroPie-Setup/wiki/PS3-Controller

Here are the steps I did (copied from the guide)
Navigate to the "RetroPie" icon in the Home Screen and select it using whatever key you mapped "A" to on your gamepad, and go to RetroPie Setup
Once in the RetroPie GUI, choose [Manage packages] > [driver].
Select PS3 Controller Driver ("ps3controller"), and then select [Install from source].
Once installation completes, exit RetroPie setup and return to the EmulationStation Home Screen.
Press "Start" to enter the EmulationStation Menu, and select Configure Input.
Disconnect your PS3 controller from USB. Now hold the PS button on the controller down until you see the lights on it flash sequentially. The controller should now be connected via Bluetooth.
Emulation Station should now detect another gamepad connected. Hold any button down on the controller to begin configuring it.

The part that is bolded is the part that is not working. My remote was plugged in for an hour so I know it has charge. It just flashes but doesn't actually connect at all.

Unless your space is at an absolute premium, then I have all ROMs unzipped, except FBA and MAME as they MUST be kept zipped

Some emulators don't like zipped files unless a specific version of ZIP was used even if they do support ZIP archives, plus it lets you know if any archives were corrupted

@grant2258 Aliexpress has cheap prices, if you have patience waiting for them to arrive..lol..I have bought some stuff from there for bartop I am in the process of building, but have heard mixed reviews regarding their electronics. My purchases weren't electronic related (speakers..power cord for my amp..and some purchases for my woman). Just wanted to comment about the long waits..haha.

@Krisu Please open a new topic explaining your problem and adding the info requested in https://retropie.org.uk/forum/topic/3/read-this-first. Don't bump old topics just because they're marginally related to your question.

I seem to have fixed this. I found a page (here) with a few extra instructions on suppressing various messages. I haven't implemented them all but it seems the one or two I have added have done the trick! I'd already added one or two of these as per the excellent Retropie docs, but the extra bits here seem to have done the trick. Been mashing about the menu for a couple of hours, and rebooted several times and so far it has not returned.

Thanks for your help. Thrilled to get it working so nice! :-)

Yes, I figured out about nesting layers, so I got the alignment working.
I couldn't get the resizing of the wheel.png to work the way I wanted, so I just adjusted the 'box' so that it worked for the tallest wheel.png when they were all adjusted by width.
It's not totally perfect but with such a variance in wheel.png sizes and shapes I think it looks pretty uniform.
alt text
alt text

Now to run it on all the other systems and hope it comes out OK.

Edit: Just tweaked the box so rather than having its own border in the png it just uses the stroke feature to match the border on the screen shot.

Not thrilled with the banding that gets introduced with skyscraper.

@martinbaker2727 Mouse issues in ScummVM were resolved with the release of version 2.0. As you are running an old version of RetroPie which runs on Jessie, for which support is no longer available, I would recommend that you start with the latest 4.4 image.

A virtual keyboard should be available in the latest version of ScummVM. It can be activated by button 7 on your controller, which, I understand, is the Guide button. If the virtual keyboard is not available, then try installing ScummVM from source.

The ScummVM in-game menu is only available with a button press for Lucas Arts titles. For other titles, it can be accessed by pressing CTRL+F5. According to the manual, in Zork The Grand Inquisitor, there are options to save, restore and quit in the Center Bar, accessed by moving your cursor to the top of screen.

@dam034 I don't use it, so I don't know the answers to these questions. You can look up in the official PCSX2 docs though - https://pcsx2.net/getting-started.html.

Look in the Docs page of the system to see what ROM extensions are accepted by the emulator and make sure you use the same format. The RetroPie image comes with the Mupen64plus installed, so it should be enough to copy the ROMs in the n64 folder and restart Emulationstation.

I remember playing N64 games on my 2004 laptop and I got great performance, so I would hope the support is fairly strong now.

Not so much, N64 is far from perfect and not all games are running well.

I mapped the C-Down button to A, the A button to B, and the B button to Y.

@stathopon said in Problem with running ROMS in Retropie 4.4 and from where can i download all roms?:

so how can i find the correct roms for the retropie 4.4

As already stated by @mitu above, read point 5 of https://retropie.org.uk/forum/topic/3/read-this-first. You don't find roms for retropie 4.4. You choose your emulator then get the correct romset for that emulator as described in the arcade link above

I found a video here that applies for my situation:

What my friend did was just give me that SD card that was already on his pie. So what I am doing right now is backing it up to an .img file and then I will restore it onto a new SD card.

I just didn't know I could do that until you mentioned it hehe. Thanks a lot mate!

EDIT: I will share a screenshot of how this retropie looks like when it is done so you can see why I like it a lot.

I think I worked it out. A year or so ago when I originally set up my retropie I was focussing on PSX emulation, and in the "autoconfig" controller mappings I must have force mapped this:

input_up_axis = "-1" input_down_axis = "+1" input_left_axis = "-0" input_right_axis = "+0"

Removing these seems to have done the trick

@retropieuser1 unfortunately we do not support third party installs. as well as breaking the license, they are badly configured, ass you've found. please reinstall retropie from scratch as per https://retropie.org.uk/docs/First-Installation/

@Dwarfboysim I believe you need to edit the hostprefs.conf file which you can find in /opt/retropie/configs/amiga/amiberry/whdboot.

The following links at the Amiberry wiki should offer further guidance:

Host Specific Settings WHDLoad Booter FAQ

@the_engineeer please post your sistem information as requested in the "read-me-first" topic referenced at the top of the forum.

@John_RM_70 said in Donkey Kong Pauline Edition:

I also want to eventually finish my old arcade overlay project I started a couple of years ago on the Retroarch forums. The last ones I worked on look like this.

Pretty :)

Ok, I've updated script and had success to install mame2013-plus.
This topic may be closed, thank you!